I come in peace.

The reason I used to use my work PC for online purchases/personal finances because the network at my employer was much more secure than my home network. But it was a smaller company back then, now that we’re “corporate” (partnered a larger entity) I don’t.

I picked up a used Garmin drivesmart 65 that I 3D printed a mount for. One of the accessories for it is a backup camera, and since my sideview mirrors see more of my shoulder than they should, it might make a interesting rear view mirror cam.

I’ve been using the Hario Skerton daily for 7 years. 24 bucks on Amazon rn.

I’m on my second spool of ASA and love it. It did require me to upgrade to a enclosure and PEI print bed.

I've got one of these sitting on the shelf since i got my CR10S PRO V2. Nothing at all wrong with it either, it's just noisy. I keep it around mostly because it's direct drive.

I have a CR-10S Pro V2 and like you, just threw a spool of polymaker ASA on it, tweaked the stock profile with turning off the fan, setting retraction to 4mm, first layer nozzle/bed temp at 265 then 150, 105 then 90 and lowering the Z height on the printer by like 0.04mm for a good first layer adhesion/squish.

Before playing with anything but the retraction, my benchy would warp and detach at 0.2", right at the deck height. After turning off the fan, like you, i got an almost perfect benchy.

Feeling emboldened i jumped right into attempting a 12hr print of a car grill emblem, 0.16mm layer height that measured 3.5"x 9.5" x .675" and it would warp at about 2/3's of the way through, even with a brim. The quality looked amazing up until the detach/warp. It happened at the same spot each time, a interior corner. I tried glue stick...nope, Aquanet hairspray was better, but the print still detached/warped each time in the same spot. It failed 4 times in all.

Last night I tried again, same print settings but with the addition of two things: a Comgrow tent enclosure (inside temp stabilized at ~40c) and a PEI steel plate bed from Creality.

This time it came out perfect, no warping! Gonna try the other half now.

If you get it dialed in, you should definitely reprint your fan shroud in ASA.

I've been tempted to do the same thing for year with my Hario Skerton and a Makita 12v driver drill. It's 400ish cranks every morning. I would imagine a finer grind with an espresso bean would take you much longer.

Now that's a fantastic budget idea, thank you. I may try exactly that on my smaller printer. I have my CR10 in a comgrow enclosure now and it's currently 7.5hrs into a 12hr print and it seems to be adhering better to the new PEI bed. Fingers crossed.

Dogs. I'm not an anti dog person, our most recent family dog passed away 5yrs ago and when i left for work, she would howl indoors loud enough for the neighbors to hear. 5 yrs later, i'm getting my due payback. The new neighbors on both sides of me have 3 dogs each that will run to the fence and bark when I go out back and also howl when their owners are away. Several houses down there is a family with a female pitbull that shrieks when she is left in their back yard. a really sweet dog, but has anxiety issues. Normally not an issue, unless it's the summer and all your windows are open.