@UniversalFlamingo@lemmy.world
0 Followers
0 Following
3 Posts

Update: I wasn’t able to fiddle with it for a few days but after getting back to it have something I like.

My current settings are based on the feedback in this thread and:

z-offset made the single biggest difference. I reset the printer config and re-leveled.

For this filament: www.amazon.com/…/B084RDMG7C/

Global Settings Layer Height 0.20 Initial Layer H... 0.20 Wall Thickness 0.80 Top/Bottom T... 0.80 Combing Mode infill Build Plate Adh... brim Extruder Wall Line Count 3 Print Thin Walls True Travel Speed 110 Initial Layer Sp... 20 Retraction Dist... 0.8 Retraction Speed 45 Minimum Extru... 1 Brim Width 4 Filament Print Settings: Default Printing Temperature 210 Default Build Plate Temperature 60 Standby Temperature 195 Fan Speed 100

The Best Ender 3 S1 (Pro) Cura Profile / Settings

The best temperature, print speed, and retraction settings, among others. Read on for the best Ender 3 S1 & S1 Pro Cura slicer profiles.

All3DP

z offset / nozzle height seems to be the thing. I’ve raised it up and it looks better. After that I played with the temp a bit and it seems to be happier around 210-215 though there is more stringing.

So far, all attempts at ironing have been a disaster, both zig zag and concentric. I’m going to continue dialing in the z offset and temp before ironing.

too hot? too cold? - Lemmy.World

This is layer 2 or 3. It will be covered by the next few layers but I feel like it shouldn’t be this fugly. I’m using Cura’s Standard Quality except for temp which is set to 205. The filament is Inland PLA.

Help me find the perfect 60-65%

https://lemmy.world/post/7996462

Help me find the perfect 60-65% - Lemmy.World

I have a Zoom65v2 that’s almost perfect but doesn’t support QMK so I’ve been shopping around and wanted to get the community’s opinions before making a decision. My criteria: - size: 60-65% - firmware: QMK - layout standard: ansi - layout ergonomics: normal - hot-swappable: required, my soldering days are behind me - per-key RGB (QMK rgb_matrix) is a must have - underlighting (QMK rgblight) would be a plus The kprepublic bm60/bm68 and Tofu 60/65 (2.0) are currently at the top of my list. I have a bm40 that I could only love more if it had more code space. (I’m selling the Zoom65v2 if anyone is interested.)

I need more thock ... - Lemmy.world

I just finished my Zoom65 V2 with kailh box jades and cheap Amazon caps. The sound is ok but I want something “deeper” and louder from the alpha keys. What do y’all suggest? Pulling out the foam in the bottom of the case and underside of the PCB definitely helped. I’ve done the tape mod and plan to do the holee mod when I open it up again.