Extreme colour change from stress
Just thought this was (slightly) interesting. It’s Jayo’s “Easy ABS” - weird stuff, not really like ABS at all. It’s very tough, but with poor temp resistance. If you bend it in half, if changes colour very dramatically [https://lemmy.world/pictrs/image/446f370f-1b4d-4a15-b635-cd94030af528.jpeg]
*BEWARE* Fake verification notices
AMD reference cards - Difference between brands?
I’m looking at buying a used reference RX 6800. I notice there are quite a few brands for the reference model (ASUS, MSI, Sapphire, etc) and wondered if any of them use better components for example. I would quite like lower odds of having coil whine if it’s related. Just to explain my choice of card: - Max 40mm thick - Supported by Ollama - No proprietary software when using linux
Are the black bits on these two teeth cavities?
4 Axis 3D Printer - Non-planar - Custom slicer!
[Question] Yellow icons in dolphin
The Mozilla layoffs ... will get worse
I just saw a post complaining about the Mozilla layoffs. I wanted to point out that the vast majority of their income (over 85% in 2022) is from having Google as the default search engine - Ironically, the anti monopoly lawsuit against Google will end this. Expect things to get worse. Please don’t assume it was just a cruel choice. S1 [https://www.bloomberg.com/news/newsletters/2023-05-05/why-google-keeps-paying-mozilla-s-firefox-even-as-chrome-dominates] S2 [https://fortune.com/2024/08/05/mozilla-firefox-biggest-potential-loser-google-antitrust-search-ruling/]
Any ideas what causes this in overhangs?
When I do an overhang test, I always have this problem at about 35°. Does anyone have a suggestion what could be causing it? * Slicer: Orca * Layer height: 0.2mm * Infill: 0% (this has improved it a lot, I think the infill was causing bulging) * Outer walls: 2 * Overhang speed: 10 or 20mm/s (both look the same) [https://lemmy.world/pictrs/image/677fb0bd-6323-4acf-b822-8f0919380954.jpeg] [https://lemmy.world/pictrs/image/a62ccd1e-841d-4136-b435-0e8d15f5018a.jpeg]
Laser printer lines across page 🤔
