Massive loot from garage sales!
I got all these things at garage sales today! - N64 with 3 controllers, all the games including Zelda TP and Super Smash Bros. - GC controller in box - Wii guitar - Wii dance pad All this came to about $100 Me and my 6 year old kid are loving retro gaming!!!
You can set text as a layer modifier in Orca
So I set this text to change the bottom layer to concentric only for the text and I got this. I had this large flat area in my print and decided to spice it up a bit for fun without doing multicolor which would be 1, too annoying to do manually and 2, too visible for this part that needs to be all black. So here I have a nice DON’T PANIC on the back of it.
The Multi-communities option is awesome!!
Will HomePods get the new Siri AI!
Best handheld to play Minecraft?
this was my favorite game!
I found this amazing trilogy for free at a swap shop! The Legacy Of Time was my favorite game as a kid! I never played the others, but now is my chance. [https://lemmy.world/pictrs/image/8c380caf-3cd6-46a3-91df-b2f10b40d604.jpeg] [https://lemmy.world/pictrs/image/b5dbd3b0-c87d-4cd7-814a-0e85b318eeb5.jpeg] [https://lemmy.world/pictrs/image/cb181790-abd2-4688-be13-c3aac89d945f.jpeg]
Kipper - Home printer only if needed
Homing your printer systematically before a print is redundant, a waste of time and sometimes even an issue (if your homing probe is misbehaving and you’ve already dialed an offset by need to restart the print for a clean first layer for instance) I recently came upon this G28 macro that only homes of the printed is not already homed. [gcode_macro G28] # Only home if needed. rename_existing: G28.1 gcode: {% if printer.toolhead.homed_axes != "xyz" %} G28.1 {% endif %} All you have to do is add this to your macro.cfg file and it will override any G28 command from any gcode and only execute a home if needed. If you want to execute a home even if not needed, you can send the command G28.1 instead
I just mapped my surroundings.
