Tak Game by craeen

A variation (in looks) of the game "Tak: A Beautiful Game" https://www.amazon.com/Cheapass-Games-239CAG-Tak-Beautiful/dp/B01LFA7QFK/ref=sr_1_1?ie=UTF8&qid=1517029133&sr=8-1&keywords=tak+game You can play the 4x4 or 5x5 or 6x6 game with this board. I used the wood grain from https://www.thingiverse.com/thing:1640999 then designed the board and stones using Photoshop and Tinkercad. For the capstones I chose 4 files from the following three Thingiverse items and forced them all to be 20mm x 20mm at the base and 32 to 35mm tall.https://www.thingiverse.com/thing:1079138https://www.thingiverse.com/thing:935856https://www.thingiverse.com/thing:1254404 Everything was printed in Hatchbox wood PLA and stained. (The red "rocks" were painted with 3 different paints). The board pictured was printed in 4 parts. (I'm also including files to print it in 2 parts or all at once if you have a large printer). If the pieces warp when you take them off a hot bed, just place them back down on the hot bed and hold them down until they flatten back out. The woodgrain and border give the stain "capillary action" so it's actually pretty easy to stain it 2 tones (use a cheap paintbrush). We like it in 4 pieces for storage, but on a slick table the pieces tend to slide, so we put a piece of our painters tape on the middle underside.