Great point. The drawer width was taken on a story stick, not numerically. I first made I side spacer blocks and then made a sandwich on the old shelf with a spacer block and a 1" block (each slide takes up 1/2") and then marked off the gap on a stick.

Observant folks might notice that I made the drawers sideways. Normally the rabbeted piece is on the side to use the mechanical advantage of the joint. But then measuring the length of the front/back pieces also involves the joint. I wanted make this task as easy as possible so I used the full length, rabbeted pieces on the front & back.

I have a big bag of knock offs from Amazon and can confirm that they work well!

Is the hot water for cleaning efficiency or just comfort?

Thanks for posting that, I didn’t understand the reference.

Because they’re not right-to-left?

Ah I see it now! Thanks for the info.

Which part is the flame sensor? Our furnace is getting old, last year I had to replace the exhaust fan pressure sensor. What were the symptoms?

+1 to Freetax USA! It handles all the stuff which require premium editions of other tax applications. And this year they’ve added PDF parsing which greatly simplified my 1099s.