Shooting the elites is much more practical than using a guillotine, I can see it catching on quick. "Deny Defend Depose" however is not on par with "Liberté Egalité Fraternité" IMO
@ByteJunk@lemmy.world
- 0 Followers
- 0 Following
- 4 Posts
Temporary pull-up during boot (ESP-01)
Temporary pull-up during boot (ESP-01) - Lemmy.World
Hi everyone! I’m trying to control a “dumb” led light strip segment with an ESP-01S. This is fairly low current, the strip will pull 150mA-200mA max (depends on… artistic? needs). I have two NPN transistors (2N2222), one to control the 12V supply to the white “channel” and the other the red+blue (don’t need the green). I had to pull-down the gates as I had some flickering, and it works perfectly if I manually connect the GPIOs after the ESP-01S boots. The ESP will boot if I have the RX pin (GPIO03) pulled down on boot, but not if I pull down any of the others. I’m not smart enough to come up with a way to have that extra pin I need to be high only during boot, while the gate it’s attached to needs to be pulled down… Any thought, other than getting something with more IO pins?