Anyone having connectivity issues today?
https://lemmy.world/post/24639117
Anyone having connectivity issues today? - Lemmy.World
I’m getting random disconnects where i can’t log in again today. Happened 3
times so far, and eventually it lets me login - I tried different gateways but
they all seem to be having some issues. It cost me some good loot on the ground.
Also, when i log back in, it has rolled back some things - like I was in my
hideout and identified some things, crafted for a bit, then sold and stashed
what i needed to. After i disconnected and was able to log in about 20 minutes
later, My stuff was back to un-identified and i still had the stuff i put away
back in my inventory. I’m wondering if there isn’t some database stability
issues or work being done. Either way, I’m not doing anything super risky right
now.
Possible bug, either way be careful!
https://lemmy.world/post/24547514
Possible bug, either way be careful! - Lemmy.World
I was in the next to last room in trial 3 at the Trial of Sekhemas and i had
exactly 91 honour left (lol). I decided to switch my weapon set to my
stronger/more offense set, since 91 honour would one shot me at the boss
regardless, and when i switched i dropped to 0 honour, but could still move. I
went to the shrine to restore 500 honor, and instead, it killed me. Mo idea if
that’s a bug or what, but i was not happy. I expected it to restore honour, but
apparently if you do what i did, it just kills you instead.
[BambuLab Blog] - Firmware Update Introducing New Authorization Control System
https://lemmy.world/post/24359601
[BambuLab Blog] - Firmware Update Introducing New Authorization Control System - Lemmy.World
cross-posted from: https://lemmy.world/post/24358989
[https://lemmy.world/post/24358989] > Looks like Bambu is getting more
enshittified. I am so glad I didn’t let my recent frustration at my clumsiness
with my Prusa steer me into Bambu-land.
It feels like an effort to start locking out third party tools (like any slicer other than Bambu Studio), but I’m sure it’s not going to stop there.
[BambuLab Blog] - Firmware Update Introducing New Authorization Control System
https://lemmy.world/post/24358989
[BambuLab Blog] - Firmware Update Introducing New Authorization Control System - Lemmy.World
Looks like Bambu is getting more enshittified. I am so glad I didn’t let my
recent frustration at my clumsiness with my Prusa steer me into Bambu-land.
At this rate, pretty sure my next printer might be a X1C, as much as I hate to say it. I’ve always valued the open source that prusa brings, but they have just had one facepalm dumb decision after another, and I just want my fucking printer to work. The Mark 4 is a great printer when it works, but it’s extremely poorly designed.
Pretty sure I just bricked my Mk4 during the mk4s upgrade
https://lemmy.world/post/24213789
Pretty sure I just bricked my Mk4 during the mk4s upgrade - Lemmy.World
Long story short, I am not mechanically inclined. I want my shit to just work.
Somehow I decided I would order the MK4S upgrade kit for the prusa MK4 that I
have. It took me about 12 hours but I did the upgrade and turned it on only to
find it wouldn’t boot with a power panic error message. I tracked it down to a
cable that got disconnected during all the upgrading, and when I went to push it
back onto the board it bent the pins. When I tried to straighten them out the
pens broke off and now I have a $2,000 paperweight on my desk.
I wrote a web front end for downloading Youtube videos, and i'd love some feedback
https://lemmy.world/post/19594490
I wrote a web front end for downloading Youtube videos, and i'd love some feedback - Lemmy.World
Hi everyone, I decided there simply were not enough docker apps for downloading
Youtube videos, and so I made the situation worse :p In all seriousness, I
couldn’t find one that fulfilled all my desires in a YT downloader, so I wrote
my own in python using pytubefix and streamlit. It’s still fairly rough, but it
works, and i’d love to get your feedback. Installation is just a simple docker
compose. yaml services: pytube-gui: container_name: pytube-gui image:
artisanbytecrafter/pytube-gui:develop ports: - 8501:8501 volumes: -
/path/to/downloads:/app/downloads # set to where you want downloads to go Please
let me know if you run into any issues, or have any feedback. I do still have a
long list :) Source code: https://codeberg.org/ArtisanByteCrafter/pytube-gui
[https://codeberg.org/ArtisanByteCrafter/pytube-gui]
Cosmic apps all freeze after latest update
https://lemmy.world/post/16704386
Cosmic apps all freeze after latest update - Lemmy.World
Hi all, I’ve been running the latest Pop_OS 22.04 LTS, and recently discovered
all the new cosmic apps from the upcoming Cosmic DE. They are seriously
impressive in both UI/UX and performance, but I got updates to all of the cosmic
apps yesterday, and now when i try and launch any of them, they simply hard lock
my computer, forcing a hard reboot to recover. I noticed a few recent reports of
similar behavior over on Reddit, but Reddit 'tis a silly place, so I’m posting
to Lemmy instead. Since I cannot copy/paste any errors, i took a picture and
hand typed out what happens when i launch cosmic-store from a terminal. It
appears to be a json-ish error. ERROR winit::platform_impl::platform] X11 error:
XError { description: "BadMatch (invalid parameter attributes)", error_code: 8,
request_code: 149, minor_code: 4 ) os info: sh kernel: 6.9.3-76060903-generic
distro: DISTRIB_ID=Pop DISTRIB_RELEASE=22.04 DISTRIB_CODENAME=jammy
DISTRIB_DESCRIPTION="Pop!_OS 22.04 LTS"
I thought I would buy a 3 kg spool because lazy, don't be me.
https://lemmy.world/post/12494771
I thought I would buy a 3 kg spool because lazy, don't be me. - Lemmy.World
Just thought I would quickly share what can happen if you’re not paying
attention with a heavy mass spool if you’re not careful. I have all my spools on
a dowel rod attached to the top of my printer enclosure and fed through an
opening in the top. Never had the slightest issue with 1 kg spools, and I
thought I would save a little bit of money and time changing filament by trying
a 3 kg spool. It spins perfectly fine without friction, but the much heavier
mass is enough to cause it to have significant strain on the extruder pulling it
in to the hot end. You can see in the result where I provided strain relief by
hand while watching it print.
[https://lemmy.world/pictrs/image/7fa1a476-1170-4613-bd51-a02a749d309c.jpeg]
