"Time Since Last Shower" tracking
- 0 Followers
- 0 Following
- 8 Posts
Also! I was able to use this to make my PIR sensor presence detection more accurate
before it would not see me in my shower and thing im not there. Now that automation only triggers if the bathroom is also ‘dry’
SuperSafe DeAR22
SuperSafe DeAR22 - Lemmy.World
Shooting this will never get old. I modified one of the printed SuperSafety trips (debo’s version) so the dwell time is basically 0. I’ve estimated it at 1200RPM based on slow-mo video. (20 rounds per second) I also printed my bolt weight, and filled it with tungsten powder. This works surprisingly well, I cant see ANY bolt bounce in slow-mo. Most of it is printed in PA12-CF some in PLA+ (like the brace) I used to have so many issues with my barrel nuts softening when I used to shoot binary. This PA12-CF is taking repeated mag dumps like a champ. over 1k rounds through this exact configuration. Printing a SME for sound mitigation too. I checked AI about the exact legality, it said not only is it good to go unregistered, it is a “museum of the inadequacies of the ATF” :) Brace, not stock. SME, not suppressor. AFG, not VFG. SuperSafe, not FA. I cant even think of any other loopholes to exploit, but I’ll try.
Charging Dock for XMax V3 Pro!
Charging Dock for XMax V3 Pro! - Lemmy.World
This dock allows you to route a USB cable into it so you can drop your XMax v3 Pro on it to charge. The USB-C hole is larger than most plugs on purpose so most will fit. Use a small amount of glue to secure the cable in place. I suggest routing it through the dock, then plug it into the vape. Apply a little glue to the edges of the USB cable and insert it all into the dock. This will ensure it always connects when you put the vape down. I also will be selling this via my webstore [https://frogcase.store/products/xmax-v3-pro-charging-dock], printed/shipped or as an STL (if you wanted to support me) Tags
Help Replicating a filter
Help Replicating a filter - Lemmy.World
My buddy has a cold plunge and this filter started cracking. After looking at it you can tell it’s definitely 3d printed (and well) On the left you can see my first attempt. I just cut rectangular holes in CAD and it’s pretty close but not pretty. Printed in PETG on a K1 Max Is there a way to do this in the slicer instead? I played around with 0 walls and different infill types but that didn’t work out
Not-a-Glock done!
"MMUs are wasteful!"
"MMUs are wasteful!" - Lemmy.World
Decided to do multicolor accents on a fosscad print and made a little cow from the purge material for my friend’s kid If you are using purge objects with you MMU you should start! Cuts the waste down to just mere grams. This was made on a 3D chameleon hooked up to my K1 Max.
AI Eraser on OnePlus Open, impressive!
AI Eraser on OnePlus Open, impressive! - Lemmy.World
I’m pretty impressed with the AI eraser! Really helping clean up strangers from pics I took in Austin It seems I’ve been sleeping on this feature! If you don’t see it in your photo editor enable AI under settings > system & update > system services > ai service engine