The pulley attached to the motor was wobbling but when i removed it the motor was fine. Turns out it was missing a set screw so the D shaped shaft was moving faster than the pulley attached to it. Once i drilled a new hole in the pulley and tapped it the thing was much better

I don't think it'll push that hard with the contact the bolt makes (the "D" looks like it was made with a grinder and someone got tired) but it will be enough for glass and small things

Well that worked well!
I taped the entire outside with packaging tape just in case it shattered, and then i taped it to the drill press so it wouldn't move in relation to the bit

@RnDanger
I think you misunderstand how straws normally work.