FozzTexx13h ago

What I've been working on for the last week: A prototype for doing bringups of bus-based #FujiNet. Has RP2350 dev board to the bus edge connector at the bottom. ESP32-S3 dev board with microSD at the top. The two dev boards will communicate over USB using the new RS232/Fujiversal protocol. Lots of debug breakouts with LOTS of labels. Solder jumpers for modding. Edge uses ISA pinout; CoCo, MSX, etc. via trivial passive pin-swap adapters.

#RetroComputing #VintageComputing #KiCad #Electronics

Show threadMark J. Blair11h ago
@fozztexx With FREE CAD TOOLS! The exact same ones I use professionally for product development! #LivingInTheFuture
Show threadFozzTexx11h ago
@NF6X Living in the future with tools that still have the same UX as using terminals from the 1970s!
Show threadMark J. Blair11h ago
@fozztexx Just the way I like it!
Show threadMark J. Blair
@fozztexx But seriously: The high-end pro tools in the $50k per person per year class are a lot crustier.
8:10pmWeb