Right, #Hackster round-up time - and it's a big 'un, as I didn't post much last week owing to being absolutely run off my feet at #EmbeddedWorld2026

First up, a new Notecard from Blues (formerly Blues Wireless), which offers Wi-Fi, cellular, and non-terrestrial network (NTN) satellite connectivity in one. They were showing it off at the show, though it's hard to get a good signal to LEO through the Messe roof...

https://www.hackster.io/news/blues-goes-for-the-triple-with-the-new-notecard-for-skylo-with-wi-fi-cellular-and-satellite-comms-9dbc2ee2f48c

#Technology #News #IoT

Blues Goes for the Triple with the New Notecard for Skylo, with Wi-Fi, Cellular, and Satellite Comms

One module, three ways to connect — and, as always, you get a data bundle with the device to get you started.

Hackster.io

Speaking of cellular connectivity, the Walter Cat 1 Bis is an upgraded version of the Walter development board - now offering faster, better cellular.

Design files have been promised, as with the original Walter.

https://www.hackster.io/news/dptechnic-s-walter-cellular-iot-module-family-grows-with-the-walter-cat-1-bis-0f48e382a485

#Technology #News #Hackster #IoT #Makers #OpenHardware

DPTechnic's Walter Cellular IoT Module Family Grows, With the Walter Cat 1 Bis

New global cellular board, built around the Espressif ESP32-S3 microcontroller, is heading to Crowd Supply soon.

Hackster.io

Then there's the Argo CM5, which I covered back when it was just somebody's random project - and now it's heading to @crowdsupply as a teeny-tiny carrier board for the #RaspberryPi Compute Module 5.

https://www.hackster.io/news/azlan-works-argo-cm5-a-tiny-battery-ready-raspberry-pi-cm5-carrier-readies-for-crowdfunding-3c87ecbff079

#Technology #News #Hackster #OpenHardware #Crowdfunding

azlan.works' Argo CM5, a Tiny Battery-Ready Raspberry PI CM5 Carrier, Readies for Crowdfunding

Despite being the same footprint as the Raspberry Pi Compute Module 5 it holds, the Argo CM5 packs a wealth of functionality.

Hackster.io

That brings us to today, where I started with a look at a project from Taras Woronjanski to port the #Arduino UNO Q libraries to Rust.

https://www.hackster.io/news/taras-woronjanski-turns-to-the-zephyr-rtos-to-make-the-arduino-uno-q-a-little-rusty-10125eac7167

#Technology #News #Hackster #Rust #Microcontroller

Taras Woronjanski Turns to the Zephyr RTOS to Make the Arduino UNO Q a Little Rusty

Work-in-progress project seeks to port libraries to Rust, and already includes a working RPC implementation for the "dual-brain" board.

Hackster.io

Sticking with #Arduino, there's the Forgetfulino - which lets you compress and upload the source code of your Arduino sketches for storage in the microcontroller's flash - meaning you can easily recover it again when you find the board abandoned in a drawer three years later.

Or is that just me?

https://www.hackster.io/news/nader-al-khatib-s-forgetfulino-embeds-your-arduino-sketch-s-source-code-right-on-your-dev-board-c82828493a18

#Technology #News #Hackster #Microcontroller #Makers

Nader Al Khatib's Forgetfulino Embeds Your Arduino Sketch's Source Code Right on Your Dev Board

Never lose your code again — by ensuring when you pull the board out of a dusty drawer years later, the source code is right there with it.

Hackster.io

@ghalfacree I have a short form for the location on my fileserver where the firmware is: something like.

f/p/c/avr/m328/pandora

I usually leave a sticker somewhere on the project.
which is just enough of a hint to get me back into trouble.