I got a chance to do some #sewing this weekend!

I bought a black #spandex #bodysuit on Amazon that I think was intentionally designed to fit loosely, but I figured it would be easy enough to alter it to be more form-fitting. I forgot to take a photo of how it fit me before I modified it, but it was very baggy in all the wrong places and very unflattering.

🧵 1/7 @sewing

🧵 2/7 @sewing

I started by putting it on inside out so I could draw new lines for the side seams with chalk. Then, after using a French curve and hip curve ruler to straighten the lines, I tested it by #sewing an easy-to-seam-rip straight stitch in white thread using a long 5mm stitch length.

After trying it on, I had to make some more modifications, like tightening it further around my waist, adding a little more room in the chest, etc. Then, I sewed the new side seams on my serger.

🧵 3/7 @sewing #sewing

Stretchy #spandex is very forgiving, so it didn’t need to be perfect. At least I was able to get the look I was going for!

I really wish I had taken a photo of the fit before the alterations, though, because it’s a huge difference. What do you think?

I still needed to coverstitch the sleeve and leg hems, which have very narrow diameters.

🧵 4/7 @sewing

The original hems appear to have been sewn with a straight stitch, so I suppose they used stretchy thread? I wanted to sew two-needle #coverstitch hems though, to preserve as much stretch as possible.

I use my industrial coverstitch machine the least, so I’m less confident #sewing with it. I was dreading that sometimes it takes a lot of trial and error to get it set up correctly since I also use it for chain-stitching jean hems with heavy-duty needles and thread.

🧵 5/7 @sewing

Indeed, it took over an hour of trial and error to get set up because the right needle kept skipping stitches.

I remembered I had a similar issue back in August 2024 (https://mastodon.social/@DanielMenjivar/113008694654158491) and changing the needles fixed it, but these needles had very little use on them.

After adjusting tensions, checking that the needles were inserted correctly, checking and re-checking the threading, and pulling out my hair with countless #sewing tests, changing the needles fixed it. 🤦🏽‍♂️

🧵 6/7 @sewing

Regarding the fit, my wife says, “It’s like it was #tailored just for you!” 😆 Almost.

I’m sure people with more experience in #sewing alterations can point out additional fixes/fit issues (comments/suggestions welcome), but mostly I’m just disappointed that, in better light, the stretched #fabric is much more sheer and translucent than I realized.

I’m going to make a pattern from this and sew myself a new #bodysuit after buying less sheer #spandex fabric.

@DanielMenjivar @sewing Nice work! 👍