Mastodawn

Internet friends, do any of you have a Fronius Gen24 series solar inverter on the same network as a Linux computer?

EDIT: Thanks everyone, I've got a few solid samples back now! Much appreciated

If so, could I trouble you to please run the following two commands and send me back the output?

avahi-browse -rv _Fronius-SE-Inverter._tcp

avahi-browse -rv _Fronius-SE-SmartMeter._tcp

(If you've not got the "Smart Meter" addon then the second command might not do anything, not to worry if so.)

Is all in the aid of reverse engineering for interoperability. If what I'm trying to do works then it'll be open sourced. 💪

Boosts for reach appreciated!

Show thread

Alez Feb 28

@projectgus here my avahi-browse output:
E Ifce Prot Name Type Domain
+ enp0s25 IPv4 Fronius Symo GEN24 6.0 Plus _Fronius-SE-Inverter._tcp local
= enp0s25 IPv4 Fronius Symo GEN24 6.0 Plus _Fronius-SE-Inverter._tcp local
hostname = [fronius.local]
address = [192.168.1.164]
port = [80]
txt = ["01=anedo9\"},\"MPPT\":[{\"MPPT_ID\":1,\"Wattpeak\":5250},{\"MPPT_ID\":2,\"Wattpeak\":1500}],\"Network\":{\"PrimaryNetworkInterface\":\"eth0\"}},\"ZeroconfMetaVersion\":\"1.0\"}\010" "00={\"DeviceMeta\":{\"Device-Information\":{\"ArticleNumber\":\"4,210,153,002\",\"CommonName\":\"pilot-0.6a-1155245686794290397_1651567800\",\"DeviceGroup\":\"S10RW\",\"DeviceSerialNumber\":\"33147067\",\"NominalPower\":\"6000\",\"SoftwareBundleVersion\":\"1.34.6-1\",\"Systemname\":\"c" "FSEI-DID=V 1|P JSON|PFC 2"]
: Cache exhausted
: All for now

Show thread

Gus

@alez Thank you!