Maroon

Requesting help to use HP Laserjet 1020 as a remote printer

https://lemmy.world/post/42153006

Requesting help to use HP Laserjet 1020 as a remote printer - Lemmy.World

I have a headless RaspberryPi Zero W that I wish to use as a server for remote printing so my neighbours and myself can have a common printer. The printer unfortunately is an HP LaserJet 1020 - the one my neighbour has happily given to me. But setting it up as a remote printer has been a horrible experience for me. I’ll write down a few of the commands I have tried to get it to work. First I made sure that the laptop is connected to the laptop with the command : lsusb When I could see the HP printer I proceeded with: sudo apt install cups hplips printer-driver-foo2zjs printer-driver-foo2zjs-common printer-driver-foo2zjs From my laptop browser, I went to <my.ipv4.address>:631 and added the HP printer. Selected the driver. Checked the Shared Printer option. Now, I rebooted the pi, re connected the printer, and tried to print something via my Linux Mint laptop. no luck Then, I read around and found that I need to run the command: sudo hp-setup So, I ssh’ed back into the pi and tried to run this command and the entire pi crashed. Has anyone managed to get this darn machine working nicely? We’re all Linux users, so I don’t need to install samba and all that.

Jan 25 at 5:27pmWeb
Show threadAE5NEJan 25
Have you tried printing locally?
Show threadMaroonJan 26
Using HPlips. It requires the use of a GUi and very temperamental for some reason. I can only give print commands from the HP printing center software where I need to click and drag files into it to get it to print.
Show threadlemmyreaderJan 25

This person blogged about it and offers two ways of making it work dongdongbh.tech/setup-hp-1020-priter-on-linux The second method doesn’t need a GUI it seems, and for the first method you could use VNC, or ssh -X, to have the pi’s desktop on your computer for the hplip GUI.

The openprinting page has another thing to say about it : openprinting.org/printer/HP/HP-LaserJet_1020

The firmware of the printer must be uploaded after turning it on. You can use a hotplug/udev script which comes with foo2zjs, or do it manually: "cat /usr/share/foo2zjs/firmware/sihp1020.dl > /dev/usb/lp0".
Resolving HP LaserJet 1020 Printer Driver Issues on Linux

hp laserjet 1020 plugin problem

Dongda's homepage
Show threadDanthetaJan 26
I had one of these about 10 years ago. The Linux device manager will be able to push the firmware file automatically provided it’s in the right directory on the filesystem. Check /var/log/syslog and dmesg when you power up or plug the printer in. The firmware should go in /lib/firmware/hp, file name sihp1020.dl.