A few years ago I made a desklamp stoplight to indicate whether I can be interrupted or not.
I've made two new members to the family(like the one showing on the left)
A few years ago I made a desklamp stoplight to indicate whether I can be interrupted or not.
I've made two new members to the family(like the one showing on the left)
@IcyPalm A small, open, square box made of a light-colored material, likely plastic or wood, sits on a wooden surface. Inside the box, several electronic components are visible, connected by a network of colorful wires. A small green circuit board with numerous pins and a small red indicator light is centrally located. Surrounding it are other electronic parts including a smaller rectangular board with various components and several cylindrical pieces. The wires, colored red, orange, yellow, green, and blue, connect these parts and lead out of the box, suggesting this is a work in progress or a completed electronics project.
ā
Two illuminated cylindrical tower lights sit atop a gray rectangular base on a wooden floor. The light on the left is green on the bottom and red on the top, and is mounted on a black circular base with a knob on the front. The light on the right is red on the bottom and green on the top, and is mounted on a similar circular gray base, with a small label on it. The base holding the lights is a rectangular gray box with several small holes on its front side. The floor appears to be made of hardwood planks. There is a small, partial view of a white door on the left of the frame.
The label on the right light reads: āK.H.K. 230V 50/60Hzā.
Provided by @altbot, generated privately and locally using Gemma3:27b
š± Energy used: 0.292 Wh