I finished my trousers!

Over a year ago I set out on the project to make myself a pair of trousers, copied from an old pair of hiking trousers that I liked. I'd never done any sewing of that complexity.
I used a 40-year-old sewing machine and did a lot of hand basting.
It was quite a learning experience. It's amazing how many pieces there are in such a garment, how many little details.

I cut the old trousers open at the seams, laid the pieces out on the floor and calculated the size of the fabric.

The fabric I used is 100% cotton, 110 cm wide, 217 g/sqm and I needed 2.5 m.

The trousers don't have a crotch seam. Instead there is a gusset that runs the whole length of the legs. There is also a yoke and lots of other details like darts at the knees and fancy front pockets. The hardest part was the zip, I had to redo that. I did the buttonhole by hand.

I know it's kind of expected to post pictures but in the end this is just a rather plain grey pair of trousers, not much to see.

#sewing #clothesmaking

OK, giving in to popular demand, I took some pictures of the trousers. I am actually wearing them so they look rather wrinkled.

These are the trousers in full. Because of the knee darts, you can't lay them entirely flat.

#sewing #clothesmaking

This is a detail of the knee darts.

#sewing #clothesmaking

This is the top part of the back.

#sewing #clothesmaking

This is the central part of the gusset.

#sewing #clothesmaking

Finally, the inside of the front pockets.

#sewing #clothesmaking

@wim_v12e I’ve been meaning to try connecting pockets to the fly shield as a way to reduce bulk

But maybe it’s not worth the trouble? Or only worth the trouble as an adventure in itself

@infryq The reason it's like that in these trousers is to strengthen the upper front of the trousers, because the original fabric was rather thin. In terms of bulk I don't think it would make a lot of difference. I do like the result but it means you have to plan a bit more carefully when inserting the zip.
@wim_v12e oh that shape is fascinating. thanks!