Charlie BaloghMar 1, 2025

Something about catching Pokemons, and all of them... 😅 I was told full 68060 Rev.6 CPU prices are high, because they are extremely scarce. I don't know, they seem quite abundant to me. 🤪 👍

From left to right: TF1260, ACA1260, Warp1260, Blizzard 1260

#amiga #retrocomputing #mc68060

Show threadIan Scott  🐙Mar 1, 2025
@chainq that heatsink on the ACA accelerator is just perfection!
Show threadCharlie BaloghMar 1, 2025
@polpo Yeah, that's definitely well made. I'd also buy that for my TF1260 if it was available separately. (Too bad the TF1260 has no mounting holes for it, or for any for that matter.)
Show threadIan Scott  🐙Mar 1, 2025
@chainq the 060 I use on my TF1260 came with an epoxied-on heatsink, so I had to shave it down to fit under the keyboard. That solved the mounting problem, at least
Show threadIan Scott  🐙
@chainq and here’s how I get some airflow over it: a 40mm fan stuck to the floppy drive with foam tape
Mar 1, 2025 at 3:40pmWeb
Show threadCharlie BaloghMar 1, 2025

@polpo This is in concept very similar to how the Warp1260 cooling works. That has a radial fan, that sits on the floppy and keyboard LED pins for power and mounting. Then it blows over a wedge-shaped heatsink, but it is wider than yours though.

Note that the ACA1260 has the CPU on the other side (towards the drapdoor, like the Blizzards). And I think it wasn't designed to run with a closed the trapdoor. I'll post about it later.

Show threadJopeMar 1, 2025
@chainq @polpo the idea is to leave the trapdoor cover off and add extra bumpons on top of the previous ones on the bottom of the case to improve airflow.
Show threadCharlie BaloghMar 1, 2025

@polpo Not sure I ever posted the Amiga 1200 w/ Warp1260 guts on Mastodon, so anyway, here's how it looks.

The fan is temperature/software controlled. I'd buy such a generic cooling solution for almost all my A1200 expansions. Even the 68030 cards tend to run quite hot, especially with FPU & SCSI module, and they're not getting younger either...

Note mine is an early card, so hopefully they improved the powder coating of the heatsink since. 😅

#amiga #mc68060 #retrocomputing