Meta Quest 3S isn't a hit with PC VR enthusiasts

https://lemm.ee/post/51552899

Meta Quest 3S isn't a hit with PC VR enthusiasts - lemm.ee

Valve has released the SteamVR statistics for December 2024, and surprisingly Meta Quest 3 and 3S have seen even less growth than last month. Quest 3S has at least improved from 11th to 9th place, but in reality it should be further ahead. We know that Quest 3S headsets used on a PC via Quest Link and Virtual Desktop are registered as Quest 3 by Valve’s survey, and only those used via Steam Link are actually registered as Quest 3S. The Quest 3’s percentage therefore includes an unknown proportion of Quest 3S, and it would make more sense to count Quest 3 and Quest 3S together. The combined shares amount to 22.1 percent. Before the launch of Quest 3S, the Quest 3 percentage was 17.26 percent. Overall, the growth of Quest 3S is below expectations. Both Quest 2 and Quest 3 grew faster after their launch, but we’ll have to see what happens in the following months. Although PC VR enthusiasts are likely to have primarily opted for the more expensive Quest 3, the fact that the Quest 2’s percentage has barely shrunk and still stands at 34 percent shows that many users haven’t switched yet to a newer Quest headset, even after the launch of the more affordable Quest 3S.

Won’t touch my quest 2 until we see wired tethered support on Linux there is no way I’m connecting the internet with that spyware junk.

You can block internet access via adguard home (DNS blocking), or via your router. Unfortunately, to sideload apps (like ALVR), you need to activate dev mode which needs registration and therefore internet access.

But ALVR works really great with the quest 2 (unless you run NixOS and a Nvidia GPU) 😭

Yeah, Nvidia and Linux drivers are a bad combo. I’ve been pretty much using GeForce since the first one, because notoriously the ATI/AMD drivers were not great. Then I switched to Linux and surprise! Sometimes when they update they’re so bad the entire OS stutters. Needless to say, I have an AMD one now… (and can vouch for ALVR! Not as polished as Virtual Desktop, but works great)
I personally find Wivrn to be much easier to use than ALVR. lvra.gitlab.io is a great place for Linux VR info.

In my brief testing, I found this to be the case as well. ALVR was constantly having a bad time (stutter, frame drops, audio drops), and the lack of reprojection in SteamVR was miserable.

WiVRn (through Envision) was a bit jank, but worked much better.

Looking into it. I’m happy with ALVR, but I didn’t see any reason not to check out alternatives :)

thanks! I have been looking for a way to do vr remote desktop on linux

found WlxOverlay-S in the link you shared

btw, your link is still broken

lvra.gitlab.io

Home

Welcome to the LVRA Wiki# This is a collection of links, useful resources and guides for the amazing world of VR on Linux. Feel free to contribute to this wiki yourself if you find anything useful that you might want to share with others. Your VR setup all depends on what hardware you have installed/available. Start by reading the hardware page. Keep these things in mind: Generally, for wireless/Android/standalone headsets, you’ll want to use WiVRn. Visit the WiVRn page for installation instructions. Generally, for wired headsets like Index/Vive/WMR/Oculus/Rift, you’ll want to use Envision to build and run the latest Monado. Monado or WiVRn are replacements for SteamVR. Once set up (and complemented with xrizer) you won’t need to launch SteamVR anymore. Install WiVRn directly if you can; it’s a lot easier than building it with Envision, which is only necessary if you need a custom branch (e.g. for SlimeVR support). Community# Join our community of thousands of Linux VR adventurers!

Linux VR Adventures Wiki
Thanks, link fixed. Glad to hear you found something useful. I find that the website I shared does not show up in search results very well, so I mention it when it’s relevant since t’s an amazing resource.