Memory errors in consumer devices such as PCs and phones are not something you hear much about, yet they are probably one of the most common ways these machines fail.

I'll use this thread to explain how this happens, how it affects you and what you can do about it. But I'll also talk about how the industry failed to address it and how we must force them to, for the sake of sustainability. ๐Ÿงต 1/17

First of all let's talk briefly about how memory works. What you have in your PC or phone is what we call dynamic random access memory. That is memory that stores bits by putting a minuscule amount of charge into vanishingly small capacitors (or not putting it in if we're storing a zero).

These capacitors continuously leak this charge, so it needs to be refreshed periodically - every few milliseconds - which is why it's called "dynamic". 2/17

This design is *extremely* analog in nature. When your machine needs to read some bits the capacitors holding them are connected to a bunch of wires. The very small voltage difference that happens in the wire is detected by the use of a circuit that turns it into a clear 0 or 1 value (this is called a sense amplifier). 3/17
So how can this fail? In a huge number of ways. Circuits age with time and use. The ability of the individual capacitors to hold the charge goes down slowly over time, the transistors in the sense amplifiers degrade, points of contact oxidize, etc... Past a certain point this can make the whole process end up outside of the thresholds required to reliably read, write and retain the bits in memory. 4/17
This can lead to different failures: a very common one is a stuck bit, which ends up being always read as 1 or 0, regardless of what was written into it. Another type is timing-dependent failures, which cause a bit to flip but only if it's not touched in due time by an access or a refresh. More catastrophic errors can affect entire lines - which is what happens when a sense amplifier starts to fail. 5/17
Either way, even a single bit error which happens once in a blue moon is catastrophic to a consumer machine. Sometimes it will cause a pixel to slightly change color, but sometimes it will affect an important computation and lead to a crash. Or worse: it'll cause some user data to be corrupted before it's written to disk, and when it is, the damage has become permanent. 6/17
If your machine exhibits rare but hard-to-explain crashes, or if you're forced to reinstall programs - or even the operating system - because of mysterious failures, or experience random reboots or BSODs, then it's very likely that your memory is failing and you need to replace it. 7/17
@gabrielesvelto story of my life, mate! ๐Ÿ˜†