Getting a little better at rolling
Getting a little better at rolling
Dude, it’s not easy at all. I had to start again because the first one wouldn’t close properly. My shaky fingers did not do an amazing job at the second attempt either, I’d argue :D
Doesn’t sound like a bad idea, the cigarette roller thingy
www.bcsmokeshop.ca/products/raw-rolling-machines
It’s all hemp based and stupidly cheap on Amazon, like $8 cad.
If you’re struggling, you can try to roll the cone first and then pack it. I’m a complete klutz and that’s what I did when I was smoking. With time, you’ll become comfortable enough to roll “conventionally”.
The problem with it not properly closing is usually that you packed it too full btw.
We have a makeshift tray out of carton that has a crease where I can put the paper with the filter, and we use a little cocktail-umbrella-thingy to push the weed a little further down the joint. Though I didn’t feel like I needed it necessarily - I was mostly fine just lightly tapping the bottom of the joint on the table to get a somewhat even distribution.
Which gap do you mean exactly? Don’t quite know what you mean
Thanks for the tips. Cheers!
This is the way. I’m a little bit spoiled and just use preolled cones. But you can still fuck it up. I have real good luck with a 10-12" poking stick, sitting it inside the cone, and then pouring my bid into the funnel. This way the poking stick is preventing the bud from falling until I pull up on it and twist letting only a little bit of bud at a time to fall to the very bottom, tamp down on the bud that fell, and repeat 4-5 times depending on the size of the joint.
Packs it evenly and you don’t get that weak spot right after the filter where it never gets packed down.
🙏🏻
How do you smoke?
Ahhh yes the tampon phase. I remember those days.
Although in 2024 I would recommend anyone to be done with smoking and buy a vaporizer. Even if you don’t consume as much, a dynavap is only 40-60EU, allows you to pretty much use any heat source, gives excellent vapor and is built to last.
Vaporents are the future :)
Interesting. They seem to be having a sale right now where I can get a rad neon pink colour “b” variant vape for 20€. Is this any good?
And compared to smoking with coal filters, are capes less damaging in terms of smoking? Afaik, it should be because you’re essentially only inhaling hot air instead of actually burning matter, right? Not a huge concern for me, but something I’d be interested to know.
I have no experience with the B but I think they should be fine. It’s the same tip as the M but just a silicone stem. There will be a durability difference in relation to stainless steel obviously but that’s why it’s cheaper.
Make sure to watch a few videos because there is a little bit of a learning curve and the activity itself is different from smoking a joint.
With regards to health vaping is currently assumed to be definitely less hazardous.
No problem man. I hope it works out for you! I found it something to get used to after I stopped smoking tobacco 5 years ago but I went haven’t looked back ever since.
Enjoy!
Oh nah, I smoke joints with glass filters that I cut myself out of borosilicate tubes. I meant “the way other people smoke cigarettes” as in quantity and frequency; I average 10 joints a day, every day. I’d smoke more if I could but I just don’t have the time 😂
I did experiment with packing Top tubes with weed but the cigarette filter takes out “the good stuff” which is why I was skeptical of the charcoal ones.
Oh, yea sorry lol
So far, I’m quite content. Now glass filters, though. What’s their deal?
Dude I’m telling you, glass filters are the way for sure. I cut a piece of 8mm OD boro tube down to approximately 30mm, which in my opinion is the ideal length and gauge for 1 1/4 papers. I can make I think 120 of them for like 9 bucks and I reuse them until they get lost or find their way to someone else’s ashtray.
They never collapse or get soggy, even if the person you’re smoking with drools like Homer Simpson. And if it’s clean it tastes better than a cardboard filter too. It doesn’t filter very effectively though, and in about 1% of my joints I suck a little flower into my mouth.
I thought I might be able to fill one with activated carbon and cap it with steel wool or something. That would be the best of both worlds, in my opinion.
Try to make sure there’s no herb between the filter and the paper, makes getting it tight around the filter much easier. Once you manage to tuck the paper around the filter nicely and have a nice grip around that part, it’s much easier to get the rest of the joint tight as well. And when the joint is properly tight around the filter, the filter won’t fly off when you shake the joint from the other end to get it tighter.
Tldr just make sure you get the paper around the filter good and tight, the rest will fall in place
Hey thanks.
That’s not common for someone to say about me, haha.
Try to succeed, and avoid failure.
“Wise words!”