doctorzeromd

Port forward to different IP based on destination address in opnsense

https://lemmy.world/post/14180978

Port forward to different IP based on destination address in opnsense - Lemmy.World

cross-posted from: https://lemmy.world/post/14180956 [https://lemmy.world/post/14180956] > Hello all you lovely people! > > I’m trying to figure out if I can port forward to different servers based on the destination domain. > > I have a domain with a wildcard cert and I’d like to be able to route all traffic headed towards “1.domain.com [http://1.domain.com]” to a server I’m calling “1”. I’d still like traffic headed to domain.com [http://domain.com] to go to where it’s currently going, we can call this server “0”, and to be able to have a 2.domain.com [http://2.domain.com] or 3 or 4 in the future. > > I thought that having a port forward rule with: > interface: WAN > Protocol: any > source: any destination: a url alias including 1.domain.com [http://1.domain.com] > redirect target ip: local ip > > Would work, but it doesn’t seem to. Any tips?

Apr 11, 2024 at 8:55pmWeb
Show threadjevans ⁂Apr 11, 2024
you need a reverse proxy.
Show threaddoctorzeromdApr 11, 2024
I have a reverse proxy, but that won’t do ALL traffic, right? Just http or https?
Show threadadONisApr 11, 2024

you only have one IP. As you rightfully said, reverse proxy does only http(s), port 80/443. this works because of the nature how http requests work. They carry the hostname as part of the protocol (request headers). SSH is a whole other story, since the client does not send the hostname as part of the protocol, only the IP and the port.

What you can do is forward different ports to different machines… 2021 -> server1, 2022 -> server2, etc.

Show threadBjörnApr 12, 2024
For SSH the ’ProxyJump’ directive is awesome. Have one server reachable from outside and then use it to jump to all the others.
Show threadjevans ⁂Apr 11, 2024
Like the other commenter said, that is correct. For SSH, I set up a VM as my SSH bastion or jump host. I connect to that, and the SSH from that to any other machine on the network.
Show threadlemmyvoreApr 12, 2024

If you control the software stack at both ends you may want to consider Chisel which is a HTTP tunnel for TCP and UDP.

The connections would go SSH client > Chisel client > HTTP reverse proxy > Chisel server > SSH server. The Chisel parts speak HTTP to each other so that part can be routed by domain.

Chisel can also do its own encryption so you can use HTTP and avoid the HTTPS-specific issues about extracting the domain name from the HTTPS connection.

Show threadlemmyreaderApr 11, 2024
Run Caddy as reverse proxy for example : caddyserver.com/docs/caddyfile/…/reverse_proxy#ex… Syntax is pretty simple and Caddy can automatically do the SSL certificate handling for you as well. No need to install Certbot.
Caddy - The Ultimate Server with Automatic HTTPS

Caddy is a powerful, enterprise-ready, open source web server with automatic HTTPS written in Go

Caddy Web Server
Show threadderbolleApr 11, 2024
use haproxy instead of Port forwards, that should work just fine
Show threaddoctorzeromdApr 11, 2024

I have a reverse proxy, but that won’t do ALL traffic, right? Just http or https?

Like if I want to ssh into the different servers, it won’t handle that, will it?

Show threadpoVoqApr 11, 2024

Reverse-proxies are not necessarily limited to HTTP, but you can set up SSLH in Opnsense to do something similar.

But for SSH you would usually log into one machine and form there do a second SSH connection to other servers in the local network.

Show threadDecronymApr 11, 2024

Acronyms, initialisms, abbreviations, contractions, and other phrases which expand to something larger, that I’ve seen in this thread:

Fewer Letters More Letters IP Internet Protocol SSH Secure Shell for remote terminal access SSL Secure Sockets Layer, for transparent encryption

[Thread #675 for this sub, first seen 11th Apr 2024, 22:35] [FAQ] [Full list] [Contact] [Source code]

Decronym

Show threadMax-PApr 12, 2024

Your router has no idea what domain has been used for a given connection, it knows the IP and only the IP.

HAproxy and NGINX can, because for HTTP you just need to look at the Host header, and for HTTPS, the SNI extension for TLS. Anything that uses TLS should be doable with HAproxy (you don’t even need to decrypt the content, just read the SNI and pass it through to the backend as-is).

For other protocols, your only options are either it supports it, or you have to do multiple ports. Or a VPN at that point would also work, remove the problem entirely.

Show threadScrubblesApr 12, 2024

Okay if I’m reading this it’s because you want to ssh into two or more servers from the outside. I get the goal, but I’ll tell you it’s not great security.

What I personally have used and recommend is that you set up a bastion ssh server. A public ssh server that is exposed, preferably on another port, that is heavily locked down. Once you ssh into the bastion, then you’re in the network and can ssh anywhere using your internal DNS.

The added security benefit is that if someone does get into that box, they still need to learn your network topography. Not security, but bastion doesn’t do anything, so they’re not immediately into a core system.

Added bonus if you do a honepot on 22 and bastion on a different port.

Show threadnotgoldApr 12, 2024

Don’t know of this working this way. The incoming connection needs to connect to a device to find out what the domain was resolved. I think it’s easier to forward different ports to different machines.

Example: domain.com resolves to your IP. Port 80 forwards to web/80 on server 0. Port 180 forwards to web/80 on server 1. Port 280 forwards to web/80 on server 2.

Almost all commodity hardware will support this set up.