bpcomp

Love Anduril

https://lemmy.world/post/8320702

Love Anduril - Lemmy.World

So my Sofirn SP10 Pro was freaking out today. I don’t think it was some weird mode I got into but whatever it was, I couldn’t get out of that messed up state. As I was going to bed I realized and Anduril is awesome and there must be some reset procedure. Looked it up and had my flashlight working again and back in advanced UI in under a minute. I really appreciate ToyKeeper and the awesome programming she has done.

Nov 16, 2023 at 6:20amWeb
Show threadAItoothbrushNov 17, 2023
Yeah sadly not every light can use it. Im working on a flashlight and im going to put rgb aux leds in it but anduril doesnt support it. Im also testing if a fan is worth it and thats another thing anduril doesnt support. I also want to have some controlls of the charging from the ui. If anyone can do these with anduril i would happily use it.
Show threadbpcompNov 17, 2023
I don’t know about fan control but Anduril does support RGB aux lights. Here is the Anduril manual showing how to change RGB colors of the aux led.
Anduril 2 Manual

In July 2020, ToyKeeper, posted on BudgetLightForum about work on Anduril 2: a major rewrite of the Anduril 1 firmware. Based on the original text manual found in the source code, this is a formatted version of that manual for easy readability on mobile devices and to make linking to specific sections possible.

Ivan: Thinking
Show threadAItoothbrushNov 17, 2023
Yeah but anduril only has low and high for every colour while i want gradual(prolly 8 bits) control of all three channels(rgb)
Show threadbpcompNov 18, 2023
Fair enough. Seems like it could be programmed in but I don’t know if it requires more memory or processing than is standard for flashlight controllers. But if it’s a custom light, then you can design your control board to have more umpf and use a customized firmware.
Show threadAItoothbrushNov 18, 2023
Yeah the chips that anduril works on dont have enough I/O
Show threadjervNov 19, 2023

I believe that with the aux lights, it’s a hardware limitation.

The TiTS10 has the new multi-channel Anduril that allows you to enable each color of aux as a channel; try 9H from On and keep holding. However, it only has them on High with 1H/2H doing nothing. You can 3C between them and normal operation (Channel 1; main emitters), but that’s it.

Show threadAItoothbrushNov 19, 2023
Yeah the chips dont have enough I/O. I couldnt find any vidoes showing the aux of the TS10. I could maybe have another chip store the values of rgb so you can set them with 1H for each colour and then go back to normal operation.