Tube🌿TimeI'm working on a new FPGA project. this one is rather complex.
I'm at the "blink an LED" stage of bringing it up.
wrote some temporary verilog to validate the bus interface using a single 16-bit register. here goes nothing
ok so i unplugged the board and powered up the computer -- and the error stays. looks like i broke something. 😩
gotta take this step by step. I should have checked this at the start but first I will force the FPGA into the unprogrammed state (-CRESET low) then check each pin to make sure it's in a valid state.
ok when *not* in reset, the FPGA is pulling the DMA line BURST_L low constantly. this is bad, and explains the 00011320 error i saw earlier.
seems that i typo'd the wiring between the top level verilog module and the module that handles the micro channel bus. it's a floating connection and it seems to mostly just sit at a logic 0.
the other problem (01290200) is more concerning and will need a logic analyzer.
yes, i made a dedicated interposer/extender board just to help with the logic analyzer connections. it's called the Fing Longer (a reference to Futurama).
hmm, so during a read operation, the data is never driven onto the bus (the output stays pulled up to FFFF). looks like the MADE24 line is staying low? that's weird. let me try making the logic ignore it.
oh! now the card is putting data onto the bus! the "test1" channel is the data direction for the 74lvc4245 buffers showing that they are transferring data from the card to the host PC.
wow, it actually works, i'm able to write a value to the simple register and read it back. this is a HUGE step forward.
i'll need to figure out what is up with the MADE24 line. could be that the pin doesn't actually do that. the HDD pinout is one that i reverse engineered a while back, so it might be a mistake.
this could also explain the damage to the PC, perhaps the card tried to write to the data bus when it was not supposed to and damaged the output drivers of some other chip.
huh, the "MADE24" line is controlled by bit 7 of register 96. I wonder what that is.
http 
@tubetime Is that photo from an Agilent scope screen? If yes, which scope are you using?
@http this is a logic analyzer, the Agilent/Keysight 16822.