staticsome basic tips for soldering.
Betty White In HDMake sure you’re using flux and don’t be precious about it. Flux it the fuck up. They sell non-corrosive flux that you don’t really have to clean up, but still not a terrible idea to clean it off when you’re done. They also have some handy flux pens instead of the typical goo in a jar.
Try not to inhale the vapors, even with the lead free solders. Shit ain’t good for you either way.
Clean and tin the tip and work quick.
I do have a flux pen.
What temp would I set the iron at? 350-Celcius seemed to work fine.
350 is good if you're working on wires, 400 for connecting to boards (only touch the metal and touch it like it's tissue paper, or just touch the leads since they won't take damage), 430 for larger parts, 450 and a heat gun only if you know what you're doing (the line between heating the board enough to attach the part and watching every other part fall off is most easily found by watching all the parts fall off). no-clean flux is a good choice for diy projects, but if something needs to last more than 20 years the flux will cause shorts.
you're probably going to want to add flux to whatever surface you're trying to connect, hover your iron over the spot while adding solder to your iron, then force the ball of solder over the connection. you might need to do this multiple times as wire can absorb a lot of solder. have something hold the wires in place as far from where you're heating if you can, otherwise try to twist the exposed metal together.
can you describe the parts you're going to connect? soldering might not be the only option.
Your last sentence nailed it. We need to know what they are trying to solder. Wire to wire.. Maybe wire nuts or a bomb splice. Wire to pad or lead, that changes everything.
From my limited experience, make sure the things you want to solder are mechanically held together. And heat the pieces you want to solder, and use them to melt the tin. Never melt the tin directly on the iron.
make sure the things you want to solder are mechanically held together I got great long term tips from others, but yea, that is my main mistake now. I do not have 3 hands! but I try to pretend I do!
You can use a third hand, typically like this: befr.rs-online.com/web/p/…/1466439
FaceDeerA common tool that accompanies soldering irons is a stand with some alligator clips, often called a "third hand". You can use those to hold one or both of the items you're soldering together.
for those third hand tools, put some heat shrink around the jaws of the alligator clips so they don’t scratch up the part you’re holding
- Heat the work, not the solder
- an iron tip with zero soldier on it creates a poor thermal bridge. Put a tiny bit of solder on the iron before you apply it to the work surface
- your iron’s heating element acts like a thermal battery. If you put it on large, cold, work, you can drain the heat below the optimal point of solder flow. Remove the iron from the work for 10 to 15 seconds to let the heating element “refill the thermal battery” before trying to solder again.
Finally: Keep filling tin until it “flows around” what you’re working on. If your tin is forming a drop on the surface, it’s not bonding properly. It should spread a bit and flow nicely on the surface/wires you’re soldering.
If you're soldering things that aren't fresh from the store then you might want to lightly scrub the surface with something sandpapery, to ensure that it hasn't been covered with a layer of something oily or corroded that might interfere with the solder making proper contact with it. A bit of abrasion might also make the surface rougher and more capable of clinging to solder, but I'm not super experienced, that just seems like something reasonable to me.
Definitely a good point. Soldering on an oxidised surface is hopeless, your surfaces should be shiny.
your iron’s tip should be nearly all black with oxidation
Ohh that’s something I had no idea about. I’ve always tried to clean and scrub my iron, whoops.
sramderThese vintage videos from Pace offer a solid set of lessons that cover just about everything for electronic soldering.
Don't turn the iron up too hot.
Tin the wires first.
Flux everything. If you need to rework, add more flux. Flux boils/burns off fairly quickly, and the residue left behind is not flux.
Clean your work so you can inspect it.
If your wire insulation has a low melting temperature, 1: be quick about it, and 2: strip the wire shorter than you need, because It will creep back as you're tinning it.
Google for "NASA Soldering Spec" for instructions and pictures of what "perfect" looks like. All of the NASA specs are free public info.
Tin the wires first.
Flux everything. If you need to rework, add more flux. Flux boils/burns off fairly quickly, and the residue left behind is not flux.
Clean your work so you can inspect it.
If your wire insulation has a low melting temperature, 1: be quick about it, and 2: strip the wire shorter than you need, because It will creep back as you're tinning it.
Google for "NASA Soldering Spec" for instructions and pictures of what "perfect" looks like. All of the NASA specs are free public info.
What are you actually soldering? A wire splice? Or a wire to a pad? Wasn't clear from your op.
If you used to solder 15 years ago then you’d want to look for leadded solder. Just follow basic precautions of some sort of fume extractor. I just use a small desk fan behind what I’m soldering that pulls it away. Yeah it does just mix it in with air in room but for hobby work it’s not going to be a big deal.
I’m also a big fan of the brass solder sponges for cleaning tips. Will clean it, the brass is softer than steel so won’t mess it up, and since you’re not using a wet sponge it doesn’t cool the tip as much
Set the temp to something suggested for the solder you're using and practice on something else you don't care about first.
Also consider ventilation and avoid breathing in the fumes. At least that's what I do, I'm not a lawyer or doctor.