Mastodawn

I want to use WSPR to test an antenna.

But I see that all WSPR beacons are in the mW ranges, not W.

My "modern" transceiver goes from 5 to 100W.

Is 5W too strong (or a nuisance) for the WSPR network ?

(I'm a well educated guy, I learned early not to disturb other peoples ! 😆)

@F4JWJ This ought to do it: The first 68ohm resistor should handle 4w, the middle 180ohm 1w, and the third (68ohm) just needs to be there.

@WT4U Thanks for the attenuator.
Standard E12 resistors 👍