libbymiller#mayke 3 #fayle trying to get 2 serials working on an esp32, but with one of them on non-standard pins. Not obviously working... https://forum.seeedstudio.com/t/how-to-use-serial1-with-xiao-esp32c3/266306/4
How to use Serial1 with XIAO ESP32C3
Luckily, I was able to use USB and UART0 at the same time. Of course, USB CDC on Boot is set to Enable. So I’ll share how I did it. ESP-ROM:esp32c3-api1-20210207 Build:Feb 7 2021 Arduino core for the ESP32 v2.05 Arduino IDE 2.0.2 Note In case of “CPU Frequency:160MHz”, it work correct, but in case of “CPU Frequency:40MHz”, it works at half the speed of what you set. This seems to be the cause. /* Multiple Serial test for XIAO ESP32C3 */ HardwareSerial MySerial(0); //Create a new Hardw...
#makevember 4 - wanted to motorise my cogs but they weren't having it, at least not on the floor #fayle
#mayke 6 #fayle another deep dive into why tf spi0.1 isn't working for spectral scan for the #lora LR1302 gateway. Does the chip not exist? maybe?? also semtech seem to have removed their forum after asking people to use it over github issues. And also now my own blog post is coming up on google for my queries. bah.
#mayke 25 I did get this home-made moisture sensor working but then broke it again. Can't solder onto those screws. I'll buy one! #fayle
#mayke 24 home-made moisture sensor that isn't working. Hard to know if it's the materials, the soldering or the pinout that's at fault #fayle
Result: Alan saw it as a challenge and woke us up at 4am #fayle https://mastodon.me.uk/@libbymiller/110419952700385279
libbymiller (@[email protected])
Attached: 1 image #mayke 23 2+ metre cardboard doors, hoping they are cat-proof so we can sleep past 5am. Nice honeycomb card from the amazing Scrapstore #bristol
#mayke 10 #fayle my bad drilling or something means some of the bolts won't fit, and although there's a bit of leeway, it's not enough. I did measure it carefully, I did!
I saw a swallow fly by.
Still annoyed though.
I saw a swallow fly by.
Still annoyed though.