No Acid: Open ICs With A Tesla Coil

We’ve taken ICs apart before, but if they are in an epoxy package, it requires some lab gear and a lot of safety. Typically, you’ll heat the part and use fuming nitric acid (nasty stuff…

Hackaday

A Particularly Festive Chip Decapping

As we approach the moment in the year at which websites enter a festive silly season of scrambling to find any story with a festive angle, we're pleased to see the ever-reliable [Ken Shirriff] has brought his own take on Christmas tech to the table with a decapping of the UM66T melody chip that has graced so many musical greeting cards.

The surprise in this age of ubiquitous microcontrollers is that this is not a smart device; instead it's a single-purpose logic chip whose purpose is to step through a small ROM containing note values and durations, driving a frequency generator to produce the notes themselves. The frequency generator isn't the divider chain from the RC oscillator that we might expect, instead it's a shift register arrangement which saves on the transistor count.

Although the UM66 is a three-pin device, there are a few other pins on the die. These are likely to be for testing. As a 30+ year old product its design may be outdated in 2021, but it's one of those chips that has survived without being superseded because it does its task without the need for improvement. So when you open a card and hear the tinny tones of a piezo speaker this holiday season, spare a thought for the ingenuity of the design behind the chip that makes it all possible.

#holidayhacks #parts #chipdecap #christmas #kenshirriff #um66t

A Particularly Festive Chip Decapping

As we approach the moment in the year at which websites enter a festive silly season of scrambling to find any story with a festive angle, we’re pleased to see the ever-reliable [Ken Shirriff…

Hackaday

[Ken Sherriff] Picks Apart Mystery Chip from Twitter Photo

It's no secret that the work of [Ken Sherriff] graces the front pages of Hackaday quite frequently. He's back again, this time reverse engineering a comparator chip from a photo on Twitter. The mysterious chip was decapped, photographed under a microscope, and subsequently posted on the internet with an open call to figure out what it did.

[Ken] stepped up, and at first glance, it was obvious that most of the chip is unused, and there appeared to be four copies of the same circuit. After identifying resistors and the different transistor types, [Ken] found differential pairs.

Differential pairs form the heart of most op-amps, and by chaining them together, you can get a strong enough signal to treat it as a logic signal. Based on the design and materials, [Ken] estimates the chip is from the 1970s. Given that it appears to be ECL (Emitter-Coupled Logic), it could just be four comparators. But there are still a few things that don't add up as two comparators have additional inverted outputs. Searching the part number offered few if any clues, so this will remain somewhat a mystery.

We've covered [Ken's] incredible chip sluething before here, such as the Sharp EL-8 from 1969.

#hardware #chipdecap #comparator #ic #kenshirriff #reverseengineer #reverseengineering

[Ken Sherriff] Picks Apart Mystery Chip From Twitter Photo

It’s no secret that the work of [Ken Sherriff] graces the front pages of Hackaday quite frequently. He’s back again, this time reverse engineering a comparator chip from a photo on Twit…

Hackaday