Mil Mi-26 1:500 - SLA 2
The Mil Mi-26 is an absolute beast of a helicopter, famous for being one of the largest and most powerful production choppers in the world. Its massive size allows it to lift incredibly heavy payloads, making it an essential workhorse for transporting huge equipment or assisting in major disaster relief efforts.
This helicopter consists of three parts, fuselage, main rotor and tail rotor. The difficulty is that the holes are always covered with resin after printing, so you need a small drill to make the holes so that the two rotors can be attached, thanks for stopping by.
Here’s what each label means:
- FDM: Printed on an FDM machine. These versions have lower detail, no panel lines, no engine blades, and use thicker walls.
- SLA 1: Printed on an SLA machine. These include antennas, include engine blades, have thinner walls, but still do not have panel lines.
- SLA 2: Same as SLA 1, but with added panel lines for higher surface detail.
Antonov An-22 Antei 1:500 - SLA 2
The Antonov An-22 Antei is a massive Soviet-era cargo aircraft, known for its distinctive twin-tail and wide wingspan. Equipped with four turboprop engines, it was designed to carry heavy and oversized loads, showcasing impressive versatility in both military and civilian operations. Its unique appearance and sheer size make it one of the most recognizable transport aircraft of its time.
Here’s what each label means:
- FDM: Printed on an FDM machine. These versions have lower detail, no panel lines, no engine blades, and use thicker walls.
- SLA 1: Printed on an SLA machine. These include antennas, include engine blades, have thinner walls, but still do not have panel lines.
- SLA 2: Same as SLA 1, but with added panel lines for higher surface detail.
✈️ Northrop YF-23 Black Widow II 1:72 - FDM • STL files
➡️ Download 3D print model: https://cults3d.com/:137309
💡 Designed by heri_3d
@cults3d #UVResinArt #AircraftMiniatures #ModelCollectors #PlaneSpotters
Northrop YF-23 Black Widow II 1:72 - FDM
The Northrop YF-23 Black Widow II prototype was a striking fifth-generation fighter concept engineered for exceptional stealth and supercruise capabilities. Its distinctive features included a blended wing-body configuration, fixed low-observable exhaust troughs, and unique canted V-tails to minimize radar cross-section while enabling sustained supersonic flight without afterburners.
Update (04/26/2020): Sorry I forgot to do something, the STL file that I was supposed to attach was a compressed (.zip) file, so I just did.
The prototype stealth aircraft is a rival of the YF-22. I attach .pdf which consists of Description and Parts and Instructions.
Here’s what each label means:
- FDM: Printed on an FDM machine. These versions have lower detail, no panel lines, no engine blades, and use thicker walls.
- SLA 1: Printed on an SLA machine. These include antennas, include engine blades, have thinner walls, but still do not have panel lines.
- SLA 2: Same as SLA 1, but with added panel lines for higher surface detail.
✈️ McDonnell Douglas DC-10-30 1:500 - FDM • STL files
➡️ Download 3D print model: https://cults3d.com/:483948
💡 Designed by heri_3d
@cults3d #UVResinArt #AircraftMiniatures #ModelCollectors #PlaneSpotters
McDonnell Douglas DC-10-30 1:500 - FDM
The McDonnell Douglas DC-10-30 is a classic long-range trijet, recognizable by its two wing-mounted engines and a distinctive third engine integrated into the vertical stabilizer. This wide-body workhorse uses a robust landing gear setup and features an extended fuel capacity compared to its domestic siblings, making it ideal for intercontinental routes.
This model is printed using an FDM printer, I hope you like it, thank you.
Here’s what each label means:
- FDM: Printed on an FDM machine. These versions have lower detail, no panel lines, no engine blades, and use thicker walls.
- SLA 1: Printed on an SLA machine. These include antennas, include engine blades, have thinner walls, but still do not have panel lines.
- SLA 2: Same as SLA 1, but with added panel lines for higher surface detail.
Mil Mi-26 1:500 - SLA 2
The Mil Mi-26 is an absolute beast of a helicopter, famous for being one of the largest and most powerful production choppers in the world. Its massive size allows it to lift incredibly heavy payloads, making it an essential workhorse for transporting huge equipment or assisting in major disaster relief efforts.
This helicopter consists of three parts, fuselage, main rotor and tail rotor. The difficulty is that the holes are always covered with resin after printing, so you need a small drill to make the holes so that the two rotors can be attached, thanks for stopping by.
Here’s what each label means:
- FDM: Printed on an FDM machine. These versions have lower detail, no panel lines, no engine blades, and use thicker walls.
- SLA 1: Printed on an SLA machine. These include antennas, include engine blades, have thinner walls, but still do not have panel lines.
- SLA 2: Same as SLA 1, but with added panel lines for higher surface detail.
✈️ Antonov An-22 Antei 1:500 - SLA 2 • STL files
➡️ Download 3D print model: https://cults3d.com/:3598923
💡 Designed by heri_3d
@cults3d #UVResinArt #AircraftMiniatures #ModelCollectors #PlaneSpotters
Antonov An-22 Antei 1:500 - SLA 2
The Antonov An-22 Antei is a massive Soviet-era cargo aircraft, known for its distinctive twin-tail and wide wingspan. Equipped with four turboprop engines, it was designed to carry heavy and oversized loads, showcasing impressive versatility in both military and civilian operations. Its unique appearance and sheer size make it one of the most recognizable transport aircraft of its time.
Here’s what each label means:
- FDM: Printed on an FDM machine. These versions have lower detail, no panel lines, no engine blades, and use thicker walls.
- SLA 1: Printed on an SLA machine. These include antennas, include engine blades, have thinner walls, but still do not have panel lines.
- SLA 2: Same as SLA 1, but with added panel lines for higher surface detail.
✈️ Northrop YF-23 Black Widow II 1:72 • STL files
➡️ Download 3D print model: https://cults3d.com/:137309
💡 Designed by heri_3d
@cults3d #UVResinArt #AircraftMiniatures #ModelCollectors #PlaneSpotters
Northrop YF-23 Black Widow II 1:72
Update (04/26/2020): Sorry I forgot to do something, the STL file that I was supposed to attach was a compressed (.zip) file, so I just did.
The prototype stealth aircraft is a rival of the YF-22. I attach .pdf which consists of Description and Parts and Instructions.
KC-135R 1:500 - SLA 2
The KC-135R is a military aerial refueling aircraft, renowned for its ability to extend the range of other military jets by transferring fuel mid-flight. With its distinctive fuselage and large refueling boom, the KC-135R is an essential asset in maintaining global air dominance and operational flexibility.
Here’s what each label means:
- FDM: Printed on an FDM machine. These versions have lower detail, no panel lines, no engine blades, and use thicker walls.
- SLA 1: Printed on an SLA machine. These include antennas, include engine blades, have thinner walls, but still do not have panel lines.
- SLA 2: Same as SLA 1, but with added panel lines for higher surface detail.
🐎 P-51D Mustang - Sally AURI • STL and SVG files
➡️ Download 3D print model: https://cults3d.com/:72219
💡 Designed by heri__suprapto
@cults3d #UVResinArt #AircraftMiniatures #ModelCollectors #PlaneSpotters
P-51D Mustang - Sally AURI
This model has been so long ago that I forgot how it started. But I'm sure it's the same as the other models here, I also provide attachment images, not sequences, but only as an installation description. I divide into 3 groups, like in the attachment photo above. Group # 1, also other groups, you can print it with a layer height of 0.1mm or less. Group # 2, all of them are on the right side, so you can make a mirror of the model. Group # 3, number 11, you can multiply it to 4 or more because of its small size. If you want to paint it, I also provide the .svg and you can print the decal.
Heri_3d