Here's the two spring barrels. A big one that has two springs, and a small one with just one. The big one is the one that was actually turning when I moved the crank, so I figured the problem was likely there. Sure enough, one of the springs in there was sheared, pretty close to the shaft attachment.
#Grafonola #recordplayer

To get the spring barrels off of the shaft, you need to press out the shaft. First remove a couple of little screws that hold the bearings in, then get the shaft out by giving it gentle taps with a small hammer and something like this long bolt (which has a non-pointy end). #Grafonola #recordplayer