Kryptonian Command Key - FDM
The Kryptonian Command Key, or Codex Key, is a highly advanced piece of alien hardware, serving as a versatile data storage and access device. It employs complex Kryptonian crystalline technology to interface with and control critical systems, holding the genetic blueprint and knowledge of an entire civilization within its structure.
Kryptonian Command Key is an inspiration from the Man of Steel film, consisting of three parts glued with super glue, combine parts 1 and 2 with glue then 3.
You can add paint, the process is in the photo attachment from start to finish, hope you enjoy it, please give me input for anything, thank you.
https://www.instagram.com/heri_3d/
Here’s what each label means:
- FDM: Printed on an FDM machine. These versions have lower detail, no panel lines, no engine blades, and use thicker walls.
- SLA 1: Printed on an SLA machine. These include antennas, include engine blades, have thinner walls, but still do not have panel lines.
- SLA 2: Same as SLA 1, but with added panel lines for higher surface detail.
Antonov An-12BP 1:500 - FDM
The Antonov An-12BP is a rugged, four-engine, high-wing turboprop freighter, designed for tactical airlift with a formidable 20,000 kg payload capacity. It's essentially the Soviet analog to the C-130 Hercules, featuring a large aft cargo door for accommodating oversized freight and the ability to operate reliably from unprepared airstrips, making it a true workhorse in challenging environments.
Another aircraft model from Antonov, this model was made upon request. Inside there are two variants, the first without a cargo door, and with a rear cargo door that can be removed. I hope you like it, happy printing.
Here’s what each label means:
- FDM: Printed on an FDM machine. These versions have lower detail, no panel lines, no engine blades, and use thicker walls.
- SLA 1: Printed on an SLA machine. These include antennas, include engine blades, have thinner walls, but still do not have panel lines.
- SLA 2: Same as SLA 1, but with added panel lines for higher surface detail.
✈️ B727-200 - with and without winglets 1:500 - FDM • STL files
➡️ Download 3D print model: https://cults3d.com/:640490
💡 Designed by heri_3d
@cults3d #miniaturist #3dmodelinglife #airbus #creativehobby
B727-200 - with and without winglets 1:500 - FDM
The B727-200 is an iconic trijet airliner, easily recognizable by its T-tail configuration and three rear-mounted turbofan engines (two on the fuselage sides and one center-line fed via an S-duct). Its key design features include swept wings and a built-in airstair below the rear engine, allowing for independent operations at airports with minimal ground support equipment.
B727-200 - with and without winglets 1:500 FDM
Here’s what each label means:
- FDM: Printed on an FDM machine. These versions have lower detail, no panel lines, no engine blades, and use thicker walls.
- SLA 1: Printed on an SLA machine. These include antennas, include engine blades, have thinner walls, but still do not have panel lines.
- SLA 2: Same as SLA 1, but with added panel lines for higher surface detail.
✈️ Embraer ERJ145 1:500 - SLA 2 • STL files
➡️ Download 3D print model: https://cults3d.com/:3127538
💡 Designed by heri_3d
@cults3d #miniaturist #3dmodelinglife #airbus #creativehobby
Embraer ERJ145 1:500 - SLA 2
The Embraer ERJ145 is a slender, low-wing regional jet known for its long, narrow fuselage and distinctive 1–2 seating layout. Its twin rear-mounted engines and T-tail give it a clean, streamlined profile built for efficient short- to medium-range routes. The aircraft’s crisp panel lines, pointed nose, and balanced proportions make it instantly recognizable among regional jets.
ERJ 145 1/500 version with panel lines and two wings separated. And here is the previous version, https://cults3d.com/en/3d-model/architecture/embraer-erj145-1-500-sla. You can see how I printed it and its supports through this link, https://www.youtube.com/watch?v=aC8_9qfDehI, thanks for stopping by.
Here’s what each label means:
- FDM: Printed on an FDM machine. These versions have lower detail, no panel lines, no engine blades, and use thicker walls.
- SLA 1: Printed on an SLA machine. These include antennas, include engine blades, have thinner walls, but still do not have panel lines.
- SLA 2: Same as SLA 1, but with added panel lines for higher surface detail.
🔑 Kryptonian Command Key - FDM • STL files
➡️ Download 3D print model: https://cults3d.com/:46897
💡 Designed by heri_3d
@cults3d #miniaturist #3dmodelinglife #airbus #creativehobby
Kryptonian Command Key - FDM
The Kryptonian Command Key, or Codex Key, is a highly advanced piece of alien hardware, serving as a versatile data storage and access device. It employs complex Kryptonian crystalline technology to interface with and control critical systems, holding the genetic blueprint and knowledge of an entire civilization within its structure.
Kryptonian Command Key is an inspiration from the Man of Steel film, consisting of three parts glued with super glue, combine parts 1 and 2 with glue then 3.
You can add paint, the process is in the photo attachment from start to finish, hope you enjoy it, please give me input for anything, thank you.
https://www.instagram.com/heri_3d/
Here’s what each label means:
- FDM: Printed on an FDM machine. These versions have lower detail, no panel lines, no engine blades, and use thicker walls.
- SLA 1: Printed on an SLA machine. These include antennas, include engine blades, have thinner walls, but still do not have panel lines.
- SLA 2: Same as SLA 1, but with added panel lines for higher surface detail.
✈️ Airbus A320neo 1:500 - FDM • 3D files
➡️ Download 3D print model: https://cults3d.com/:193707
💡 Designed by heri_3d
@cults3d #miniaturist #3dmodelinglife #airbus #creativehobby
Airbus A320neo 1:500 - FDM
The Airbus A320neo (New Engine Option) is a popular family of narrow-body airliners featuring significant efficiency improvements, primarily through the incorporation of new-generation CFM LEAP-1A or Pratt & Whitney PW1100G geared turbofan engines. This re-engined variant boasts a $\mathbf{15\%}$ reduction in fuel consumption, extended range, and lower noise footprint compared to its predecessor, making it a key component in many airline fleet modernization plans.
The .stl file, a brief explanation of the print settings, how to assemble it in .pdf format, it's all in a compressed file to make it easier for me to upload. Tell me your opinion or advice about the model or other, thank you.
Here’s what each label means:
- FDM: Printed on an FDM machine. These versions have lower detail, no panel lines, no engine blades, and use thicker walls.
- SLA 1: Printed on an SLA machine. These include antennas, include engine blades, have thinner walls, but still do not have panel lines.
- SLA 2: Same as SLA 1, but with added panel lines for higher surface detail.
✈️ B727-200 - with and without winglets 1:500 FDM • STL files
➡️ Download 3D print model: https://cults3d.com/:640490
💡 Designed by heri_3d
@cults3d #miniaturist #3dmodelinglife #airbus #creativehobby
B727-200 - with and without winglets 1:500 FDM
B727-200 - with and without winglets 1:500 FDM
✈️ Embraer ERJ145 1:500 2 - SLA • STL files
➡️ Download 3D print model: https://cults3d.com/:3127538
💡 Designed by heri_3d
@cults3d #miniaturist #3dmodelinglife #airbus #creativehobby
✈️ Northrop YF-23 Black Widow II 1:72 • STL files
➡️ Download 3D print model: https://cults3d.com/:137309
💡 Designed by heri__suprapto
@cults3d #miniaturist #3dmodelinglife #airbus #creativehobby
Northrop YF-23 Black Widow II 1:72
Update (04/26/2020): Sorry I forgot to do something, the STL file that I was supposed to attach was a compressed (.zip) file, so I just did.
The prototype stealth aircraft is a rival of the YF-22. I attach .pdf which consists of Description and Parts and Instructions.
"Оцифровал" sg20 для дальнейшего использования в моделях. Можно конечно только контрольные размеры, но душа требует красоты.
----
#3dmodeling #3dmodeling #3dmodelinglife #electronic
Heri_3d
Cerbera3000