Apple, Home Automation, 3D Printing, AFOL, Casual Gaming, Lawn Care
Developer of https://Eastwatchapp.com
Staff Software Engineer (iOS)
Father of two
Dallas, TX, US
| Eastwatch App | https://eastwatchapp.com |
| GitHub | https://github.com/shaneqi |
After about 2000 hrs of printing, the first 0.4mm nozzle finally gave out last night.
@M4x Turned out it was because of the congested poop chute.
I started a 22 hrs print before we left for vacation. The print was interrupted at the -40 min mark because the "toolhead front cover fell off"? Like, how?
I guess you will need to keep the bed warm for 3 days until we are back LOL.
This is a dual bit holder for Milwaukee M12 Non-Fuel drivers/drills Notes:I only have a screwdriver(2401-20), but based on the picture of other non-Fuel screwdrivers and drills, this should fit them all.The holes for the bits might be too loose or too tight based on your printer's tolerance. You probabbly can scale the whole model to 101% or 99% to adjust the holes to fit your bits perfectly.The screw, used to attach the holder to the screwdriver, is the same screw that came with the belt clip. I don't know the size of that screw unfortuantely.If you don't want the holes to be that deep, you can use the BambuStudio “cut” tool to cut a certain height off of the top.
