For more pictures: https://imgur.com/a/KLFY7xG

This is an odd one but I am pleased with how it has turned out. After the asscade this is probably the most involved #bdsm furniture I've built. It involved wood working, some basic wiring, and some very basic metal fabrication.

So features: the sub straddles the display stand like a wooden horse. The seat is padded for longer term use, and has a #vibrator built into the front of it, wired to a dial and plug in the back of the stand.

Underneath, a metal rectangular tube fits two curving oak spreader bars which can slot into place and are held there with pins. The sub's legs are spread and shackled to the bars one at a time.

Their arms are bound using some variant of armbinder, or the serving stocks if you want them to function as a table (holding a tray).

In the end, I'm pleased with the finish. I like the combination of antique-looking furniture with built-in electronics, and how well it matches the rest of our furniture.

#bondage

Bondage arcade:

Here is a fun twist on those couple's trust/cooperation exercises. There are two roles: the Player and the Controller. The Controller is boxed up inside the arcade cabinet with their butt sticking out the front. Temporary tattoos of arrows and oversized buttons have been applied to them. They are tied up but holding an USB game controller. They can press buttons but can't see the game.

The Player can see the screen but not directly use the controls. They use the Controller to play the games. This part is pretty straightforward. You insert your joystick and use it to convey direction, and use targeted spanks for button presses.

Any MAME or multicade arcade template will do for a start. We made the control panel replaceable, built a removable, slanted bench inside so she could sit more comfortably and used a wooden dowel threaded through a pool noodle as a removable padded rest for her arms for comfortable support.

The gallery: imgur.com/a/cYUCCAS

#bdsm #diybdsm

Bondage bookshelves show up in art occasionally, so we decided to build one IRL. Our main addition was a front stock piece with attached ball gag, mounted at a 45° angle for ergonomics. The structure only works if someone is inside it (it is being held up in this photo before it was isolated). The shelf is supported by the sub and it is a strenuous position to maintain.

The shelf is built in two parts, split at the stocks. The sub steps onto the base, straddling the pole and, facing away from it, with their arms strappado behind them and places their wrists in the bottom half of the stocks. Then their partner places the top part so the stocks are closed and the shelf rests across their shoulders. They latch the stocks together. Then they swing the front part closed so the ball gag is in the sub's mouth and latch it in place. Then they rush to load books onto the shelf so they can enjoy the scene before their partner needs freed again.

More photos here: https://imgur.com/a/UQwyRG4

#bdsm

One Bar Prisons are popular on /r/BdsmDIY, here is our version

It was made with about $60 worth of materials from Lowes and a dildo from Amazon which was made for a massager. For safety, and to mount the dildo, I carved a wooden crossbar with short holes drilled top and bottom (the top one is narrower) and painted it to match the flange. I used a wide wooden premade disk as a base. Also for safety I used a more flexible toy and made sure there was sturdy furniture within arm's reach she could steady herself on.

Ideas for improvements:
At the moment the height is controlled with pre-drilled holes (matched to different shoes she has) and a lynch pin. This worked well but I may eventually go for something more adjustable like a round clamp or even just a large spring inside the base so it moves up and down with her (handcuffs required for this version). The pin seems fairly safe though as I can rip it free quickly and let the toy drop.

#bdsm #onebarprison

Punishment Bra – made with an old bra and a DIY Leather Jacket Spike Kit from Amazon – this one is simple, I got the kind of spikes that screw together and used a wood burner/soldering iron with a narrow tip to poke/melt holes through the fabric/foam

#bdsm

Serving Stocks -- locking stocks worn behind the small of the back (allowing for the wearer to hold a serving tray)

See the full gallery here: https://imgur.com/a/iMvrGqs

These have probably already been invented somewhere under another name, but this is my take on Serving Stocks. They’re worn behind the back, with the elbows through each hoop. This traps the wearer and limits the use of their arms, but still leaves their hands free to (awkwardly) do tasks like tidy up, or hold a serving tray (hence the name). (The tray works even better if you level it by adding the cheap y-chain nipple clamps, attach two of them to the sub and run the last strand up through their collar and back down to the front of the tray.)

The stocks also ‘improve’ their posture, forcing them to arch their back slightly, leading to more of a chest-thrust-forward-butt-thrust-back sort of pose, especially when combined with heels.

#BDSM

And while people are interested in the Gagwriter I should post it's predecessor, the gag version which displays an image on the front for each button press:

Modeled on a dildo gag, this 3d printed arduino-powered device is studded with buttons in training-relevant locations which the wearer uses to control a screen mounted on the front of the panel.

This build includes the models, Arduino code, art, and a guide on how to make it. There is plenty of room for improvement in the design and I'm looking forward to seeing what you all come up with, but what I have here is satisfyingly functional, even if it requires a little modification after printing.

other photos: https://imgur.com/a/e7emzZy

https://www.printables.com/model/257148-typingtalking-gag

#gag #bdsm

(the image shows a 3d-printed panel gag with a round screen on the front displaying a heart, and a rainbow of wires running along one strap to a box on the back)