767 Followers
168 Following
451 Posts
@faultcraft Thanks!!
@dr_a Oh that's looking so good!!
@llorenzin @crafters This looks great! Also with the yarn in each hand it's giving Iron Man vibes

RE: https://infosec.exchange/@cannibal/116305217277234046

It's #MakeShitMonday! Lets see your project progress or things you've made. Anything goes!

I learned how to make the hat I usually wear. I need to adjust the shape of the next one but I learned a lot.

Show me what you got!

This project is done. The bill is too long and the side panels are not quite the right shape but for the first one this is will do. The fit is spot on.

Lots of mistakes were made and I learned a lot. This is canvas and will be waxed but the next one will be herringbone wool.

Sweatband and liner are in, I just need to anchor the bill to the front crown and this project is done.
Space Dice

A space laser noise machine, an electronic dice machine. A combination space laser noise and electronic dice machine.

Oskitone
This evenings progress, got the liner and brim cut and sewn. Might get them attached tonight if I play my cards right.

#makeShitMonday, #meshtastic edition, in which we made #mesh #radio connections... in a #cave!!

@mbroome and I just completed a weeklong vertical cave rescue certification course, complete with a full-day simulated rescue scenario at the end. Standard comms for cave rescue is over wired field phones - but for this one, we had mesh radios all the way down to one of the main caverns that needed vertical rigging for the rescue.

I was Entrance Control (tracks who goes in / out of the cave, relays comms from the cave to Incident Command on the surface) and had my new MeshPocket on their dark mesh, based on [Vangelis]( https://github.com/semper-ad-fundum/vangelis). @mbroome was on comms *in* the cave - and also had my little Muzi R1 mesh radio.

It's definitely not ready to be primary comms - the radios struggle with low-airspace passages and corkscrews - but it's pretty darn close! Need to add some wired bridges like [the Flamingo project](https://github.com/rbreesems/flamingo) - that project has a really [neat video](https://youtu.be/R3LtLcnrpAk) from a test in Tumbling Rock...

Mesh radio is definitely a new paradigm for cave rescue, and I think doing it in parallel with existing field-phone tech will need separate operators. I had a pretty comfy setup with a field phone to the cave in one ear and an FRS radio to Incident Command on the surface in the other - which was fine, they're both auditory processing and push-to-talk so the only challenge was making sure I pushed the right button each time. ๐Ÿ˜ Taking notes was additional cognitive load, and adding mesh comms (visual processing / type to talk) pushed it well beyond anything I could have tracked in a real emergency!

Which is great to know in advance, and I really do think that when this tech matures, it will make a solid replacement for the field phones and comms wire that's been used for the past several decades...

@cannibal

#MakeShitMonday, another #meshtastic edition...
This past weekend, @llorenzin and I were in western Virginia at a get-together for a cave conservation society that we're members of, and we worked on making more #mesh connections. Rather than testing in-cave like L shared above, we were testing how far we could get LoRa signals to reach above ground to see if we can connect the different properties / preserves in the area that the society owns. This would be a big win, since the entire area is in the national radio quiet zone for the Green Bank Observatory, so there's no cell phone reception, and two of the three properties we're trying to link together don't have landline service.

We started with the two closest properties: about .5 miles apart as the crow flies, with a significant hill between the two. L stayed at the first site (and hiked around and up and down one of the hills), and I drove to the other site (and stopped at various places then hiked around and up and down one of the hills).

We were armed with a couple of mesh radios, and we also had #GMRS radios so we could be in voice communication in parallel to discuss the testing as the mesh messages worked and didn't work and coordinate our movements.

Overall, the connectivity between our two radios worked much better than I was expecting! We were able to get messages through at many - but not all - of the points we tested, and we have a good idea about where to put a couple of nodes up in trees to get good connectivity between those two properties. (I was also pleased that the GMRS radios didn't have any problem talking at any of the points we tested.)

Next time we're in the area, we plan to do similar testing to see how best to connect in the other property. That one's a bit farther away so we'll probably need a bit more planning for where to position radios and may involve asking intermediate landowners whether we can put a radio on a hill in a tree.

@cannibal