Bouncing between psychotherapy and IT. Aviation and petrol infected.
Weirdest hobby: I’m getting paid for flying the world with puppies on their way to new home.
Feel free to assume my pronouns and gender
26 March 1905 | An Austrian Jew, Viktor Frankl, was born in Vienna. A neurologist & psychiatrist. One of the founders of psychological humanism.
He passed through Theresienstadt and the camps of Auschwitz, Kaufering & Türkheim. He survived. Author of 'Man in Search of Meaning'.
Today, our team met with Steve Witkoff and Jared Kushner in the United States. This is important for the whole world: diplomacy continues, and we are working to end Russia’s war against Ukraine. No one wants this war. The teams will continue discussions tomorrow.
The key issue is to understand how ready Russia is to move toward a real end to the war – honestly and with dignity – especially now, when geopolitical tensions have increased due to the situation around Iran. A more detailed report from our team will follow.
🇨🇿 Currently in the Czech Republic a large demonstration is taking place in Prague under Slogan "Let's not let our future be stolen"
Support for President Peter Pavel in his conflict with the government of Babis and the coalition. Sharp cuts in defense spending. Attempts to put pressure on public broadcasting. Appointment of controversial figures and more!
Czechs, please describe the situation more specifically in the comments 👀
I met with the leadership of the Spanish engineering and technology group Sener Aerospace & Defence. Today, Ukrainian manufacturers signed four cooperation documents here, three of which are specifically with Sener. The agreements concern establishing cooperation in the missile sector and air defense. This is what will strengthen the protection of Ukraine’s skies.
We discussed production capabilities and bolstering Ukraine’s air defense. Strengthening air defense and protecting lives are our top priorities. We are also interested in joint projects in the field of long-range drone production. Ukraine has new developments and is ready to scale them up.
We expect that all agreements between Ukrainian and Spanish manufacturers will be implemented as soon as possible. Thank you for your support and readiness to work together.
This clip was design to fix/repair/secure the broken or loose tab of a RJ45 Ethernet connector and avoid crimping. Designed to prevent from moving, wiggling, falling from the connector and easy to install.UPDATE v.4.9 | 28/01/2021Added the 3 following files which have slightly wider body (0.25mm) than 4.7 version and small upgrade on the tip.1. "4.9.nf.supported" (extension) comes "with supports" for the ones are not very familiar with. But I still prefer S3D's supports.2. "4.9.nf" (extension) with "no fillet", to make it easier printing with supports.3. "4.9" (extension) with fillet, for "smooth edges". On FDM printers isn't that much noticeable.UPDATE v.4.7 | 01/01/2021Added another version with "no fillet" (".nf" extension), actually it has sharp edges to make it easier printing with supports.PrintingSuggested printing orientation is the one as the files are stored, why?Printing the tab from the base to the tip in X-Y axis makes it stronger and more flexible since its printed in one continued string.If you change the orientation with the tip on top then tab's base will start from the bottom and builds up while the Z axis is sticking the rest of it till the tip. With this orientation the tab has more possibilities to brake since Z layers don't bond the same as the method I suggested.*If you have another solution let me know.Supports Supports needed and you need to be experienced with good slicer settings. Also attention needed when removing them from the actual print.Or you can print the file with "4.9.nf.supported" (extension) which comes with supports. But I still prefer S3D's supports.Installation note:1.Before install the "printed clip" check the left overs of the broken tab. If it is too long the tip of the "printed clip" might not click underneath the left-over. So, I suggest to leave a length of the broken tab about "0,5-1,0mm". If the broken tad left-over is to small or cuted flash then the printed one might not click and hopefully that would work well, haven't tested that scenario.2.Follow the sketches to install the "printed clip", also while sliding in if you find it a bit hard some wiggling might help.*You may call it the "ScorpioNet" or "Devil's Network Tail"! Designed in InventorIf you enjoy and want to support my work you can donate me on the link below,Thank you!
Well, I guess it's time to start making new friends. 🙃 (And I have no idea how to do that after thirty!)
So, is anyone here from #Sweden, ideally from the #Ramsele area? I'll probably be moving there in May, and it would be nice to get to know someone!
If you live nearby, don't hesitate to get in touch. And if not, at least repost this so I can find someone.
Thanks a lot!
Auschwitz Memorial
Lyn
Volodymyr Zelenskyy 
MAKS 25 👀🇺🇦
Jason Lefkowitz
Trav / Theresa
Nath
Muzzug 
Vee