| Woodworking | #woodworking |
| Wildlife | #wildlife |
| Pixelfed | @[email protected] |
| Own Photos | #SpohrPhotography |
Grimy Reaper.
I carved this little figurine from some pallet wood I had lying around. The inspiration hit after seeing one of @ralphruthe’s cartoons (https://troet.cafe/@ralphruthe/115467773867988131). I couldn’t resist bringing the character to life in wood.
#woodworking #woodcarving #reclaimedwood #handmade #cartoonart
Vintage-style salt box, made from Syzygium luehmannii (small-leaved Lilly Pilly) timber from our own backyard hedge.
We cut part of the hedge back, milled a few boards from it, and let them air-dry for about a year. Once the timber was ready, I turned one of those boards into this salt box.
#woodworking #handmade #vintagestyle #woodcraft #australianwood #lillypilly #hobbywoodworking #woodcurl
Built a little workshop project: a dust mask storage box made from pallet wood. 🪵😷
Pull the lever underneath and the inner box drops down to reveal the mask. Keeps it clean, handy, and adds a bit of fun to the shop!
Built a little workshop project: a dust mask storage box made from pallet wood. 🪵😷
Pull the lever underneath and the inner box drops down to reveal the mask. Keeps it clean, handy, and adds a bit of fun to the shop!
DIY Steampunk Chest | Pallet Wood Project with Working Gears & Flame Lights Transform #pallet wood into a stunning #steampunk treasure chest featuring working gears, a vintage pressure gauge, and flickering flame lights. This unique upcycled wood project blends rustic craftsmanship with industrial fantasy design.
DIY Steampunk Chest | Pallet Wood Project with Working Gears & Flame Lights
Transform #pallet wood into a stunning #steampunk treasure chest featuring working gears, a vintage pressure gauge, and flickering flame lights. This unique upcycled wood project blends rustic craftsmanship with industrial fantasy design.
🪵 Tried some new techniques on this wooden box build!
💫 Gave wavy lamination a shot for the lid—cut strips in a wave, glued, sliced, and repeated. Saw it on YouTube and had to try. Pretty happy with the result for a first go!
🔩 Side hinges were inspired by a Pinterest post. Getting the arm lengths right was fiddly, but it worked out.
Always learning, always experimenting. ✨
#Woodworking #DIYBox #Lamination #BandsawProjects #WoodworkingExperiment #mastomakers
🪵 Made a tiny 3D wombat from scrap timber using my bandsaw!
Couldn’t find a template, so I made my own. Asked ChatGPT for front and side views of a wombat, resized them in Affinity Photo to about 2 cm x 3 cm, then printed and glued to the wood.
Cut one side with a 3 mm blade, taped it back together, cut the other, then shaped and sanded it with a Dremel.
Pretty happy with how it turned out! 🐾
#Woodworking #Bandsaw #Wombat #3DWoodcut #ScrapWood #MastoMakers #handmade
Just finished a #woodworking project — a glasses case made from reclaimed #pallet hardwood.
It began as a simple rectangle. I drilled out the centre with a Forstner bit, then shaped the exterior by hand into a rounded form. It’s not perfectly round, which gives it a bit of character I really like.
The fit is snug — no room for the glasses to wiggle. Curious to see how woodmovement might affect that over time. I may need to rework the interior if it tightens up too much. Time will tell.
