DJ Sundog from the *new* toot-lab

after swinging through #NEHI for a quick brush of the aluminum dust from the parts being lased, I decided the calibration effort on laser #2 wasn’t going to do the thing we want it to do, so I terminated the job and will do further troubleshooting this coming week.

in the meantime, laser #1 is still blasting away at the back half of the mold until tomorrow morning and streaming here: https://communitymedia.video/w/eLZ9aajWYauRVxGfjRxPJ4

once it’s done and I clean the machine, I’ll get it started doing the mold front while I try and fix laser #2.

lasers!

NEHI LaserVision 2.0

PeerTube
Mar 15 at 2:01pmWeb
Show threadDJ Sundog from the *new* toot-labMar 15
and, of course, we’re still #3DPrinting a huge version of the piece that the laser-ablated molds will injection mold much smaller - that livestream is here: https://communitymedia.video/w/aNHhQV2ThVFMC4ehpbiXuR
Orange Storm Giga livestream from ellijay makerspace

PeerTube