B727-200 - with and without winglets 1:500 - FDM

The B727-200 is an iconic trijet airliner, easily recognizable by its T-tail configuration and three rear-mounted turbofan engines (two on the fuselage sides and one center-line fed via an S-duct). Its key design features include swept wings and a built-in airstair below the rear engine, allowing for independent operations at airports with minimal ground support equipment. B727-200 - with and without winglets 1:500 FDM Here’s what each label means: - FDM: Printed on an FDM machine. These versions have lower detail, no panel lines, no engine blades, and use thicker walls. - SLA 1: Printed on an SLA machine. These include antennas, include engine blades, have thinner walls, but still do not have panel lines. - SLA 2: Same as SLA 1, but with added panel lines for higher surface detail.