Dr Johnny BlanchardFeb 24

The Sun Ultra 30 is running, turned out that one of the hard drives was shorted and two memory sticks were in back to front. Incredibly the memory seems to be fine.

I just need to fix the NVRam - so a bit of melting and dremeling to do this weekend - and then I have to find the right values to set. Plus I’m guessing the other hard drive is also dead, so I’ll need to work out a solution for that.

Show threadRegionales Retro-RechenzentrumFeb 24
@jonn_blanchard Do you know the „Necroware“ method for NVRAM modules? When heated with hot air, the plastic casing gets brittle and can be pulled apart. No dremeling, no mess. Sorry if already known, but I‘m enthusiastic about this improvement of the process
Show threadDr Johnny BlanchardFeb 24
@3rz I was considering trying a heat gun this time - I’ve never used it before though (never apologise for trying to share knowledge)
Show threadRegionales Retro-RechenzentrumFeb 24
@jonn_blanchard Between 70-90 degree Celsius seems to be a good
"hot spot" (pun intended). Surprisingly low temps.
Show threadonionFeb 24
@3rz @jonn_blanchard this was news to me, any guides or just point and heat?
Show threadRegionales Retro-Rechenzentrum

@onion @jonn_blanchard https://www.youtube.com/watch?v=ecTZtZhE9bI&t=763s has the trick. Way cleaner than dremeling/drilling.

(if timeskip-parameter is lost, start watching at around 12:43)

#nvram #rtc #dallas #necroware #brittle

Let's talk about RTC options once again

YouTube
Feb 24 at 1:44pmWeb