Rommudoh
Finished #soldering another #StackSynth #diysynth module, an important one: the #VCA - together with the ADSR, it makes the output sound much better.
Again, boards were manufactured by @aislerhq and they look nice.
I noticed that I didn't have any 2MΩ 0805 #SMD resistors, but found a couple of larger 1206 2.2MΩ ones in my recycle bin. They don't fit perfectly, but should do until I have the proper ones.
#synthesizer #LM13700 #TL074
Mar 24 at 9:06pmWeb
Show threadRommudohMar 26
And here is the #StackSynth power supply board done. It provides dual rail +/- 12 Volt from 12 Volt AC. Stable for at least 300 mA. The diodes D1 and D2 get a bit warm, though. I'll have to see how it performs with my modules attached.
Again, boards were manufactured by @aislerhq and arrived together with the VCA.
My StackSynth tower is almost finished so far. There will be a Noise module coming and maybe I'll add another LFO.
#soldering #diysynth #synthesizer #powersupply
Show threadAISLERMar 25
@rommudoh You really are on a role!