Didier

I need your help!
I want to change the output into a mono-signal!
So I'm looking for the cheapest solution to do so.
BUT
I still want it to be a balanced signal and of course I don't want to have any delay on the signal so I can still beatmatch my vinyl.

#djtips #djlife #inthemix #technodj #realdjing #electronicmusic #vinylrecords #helpme #beginnerdj

Feb 16, 2025 at 5:54pmWeb
Show threadSander van KasteelFeb 16, 2025
@ON8SD Technically if you just use the "left" output, it should just be mono.

However, if you want to combine the signals from left and right into one signal there are DI boxes that can do that for you.
Show threadoleslavFeb 16, 2025
@me @ON8SD +1 to this post. I was going to say the same :)
Show threadDidierFeb 16, 2025
@me TNX! I do want to combine both left and right, for now I'm using 1 channel 😉.
Could you help me with pointing to such a DI-box? One way or another I can't find one or I'm not understanding how those boxes work of course...
Show threadSander van KasteelFeb 16, 2025
@ON8SD You are looking for a stereo DI box which has "summing". From the top of my head, one DI that has this feature is the Klark Teknik DN200. If you enable the summing, both outputs (L and R) have the exact same signal output.

You have to fold out the description to see the "summing" feature explained.

Link:
https://www.klarkteknik.com/product.html?modelCode=0809-AAS
Klark Teknik | Product | DN200

Show threadDidierFeb 17, 2025
@me Those were the magic words indeed! TNX a lot!
Show threadSander van KasteelFeb 17, 2025
@ON8SD You are welcome!