qualcuno ha una #stampante3d ? che ne pensa di questo progetto ? è fattibile?
https://i.redsnake.io/watch?v=NZAx0Madaes
ps.....il progetto è
#opensource e gratuito
https://github.com/Reiten966/Polyformer
This machine turns water bottles into 3D printer filament | Polyformer

Any plastic bottle can be turned into 3D printer filament with this machine. Join the discord: https://discord.gg/sPX745cn4s Hackaday documentation: https://hackaday.io/project/185304-po... (Finalist) James Dyson Award Entry: https://www.jamesdysonaward.org/en-US/2022/project/polyformer-plastic-bottles-to-filament-in-rwanda/ (Finalist ..... hopefully :)) Team Members: Reiten Cheng, Swaleh Owais Special thanks to Joshua Taylor from the recreator3D project for advising/mentoring us on PET bottle recycling!

Call Me Swal | Invidious

@peppenamir

Questi progetti (ce ne sono decine) mi lasciano molto dubbioso.

Non è che non si possa fare, ma bisogna vedere la qualità di ciò che ci esce.

Da quello che ho capito funziona con striscioline di PET che finiscono direttamente nell'estrusore.

Ho già provato e tagliare una bottiglia a spirale è molto meno facile di quanto possa sembrare.

@GustavinoBevilacqua ho visto in rete degli aggeggi che ti aiutano a tagliare la bottiglia a spirale, a me l' idea di poter riciclare la plastica e farci quello che mi piace mi stuzzica un sacco
@peppenamir @GustavinoBevilacqua nel video mi pare che dopo aver fatto vedere come si tratta una bottiglia per renderla liscia procedano a tagliarne una bella dritta di suo.

Mah...

@SparkIT @peppenamir

Queste cose preferirei non vederle in video, ma dal vivo.

@GustavinoBevilacqua @peppenamir I cut a few and use them as extremely strong and durable zip ties. Stuff I fixed with them (tied it on and then heat gunned it into place) still holds up strong five or so years later being outside in frost and summer sun (50 C at least next to concrete wall). BUT I cut like, five bottles and I still have most of the material, probably will last me a lifetime. They are also nice to heat gun onto the legs of diy outdoors wood furniture, which takes much less work lol. And lasts just as long.

Anyway the point I wanted to make was that to cut that original five or so bottles up took me about two days... If there's any design on that bottle, you'll have a very hard time turning it smoothly, it might even be impossible. And there's some kind of shaping/raised lettering or stuff put on most of them.