Alvarez Abogados TenerifeUsura tarjetas de crédito Tenerife.
https://alvarezabogadostenerife.com/?p=55417
#alvarezabogados #abogados #Tenerife #tarjetacredito #revolving
News BeepPrincipal crisis: One in five new school leaders quit within a year
NZ Principals’ Federation President Leanne Otene said multiple pressures are forcing leaders out so quickly. “The principal shortage…
#NewsBeep #News #Headlines #burnout #crisis #curriculum #describe #door #escalating #five #fuelling #in #Leaders #leadership #new #NewZealand #NZ #one #principal #principals #quit #revolving #school #shortages #teacher #upheaval #what #within #year
https://www.newsbeep.com/285582/
Robert Groom
SplinesSee https://pixelfed.social/p/Splines/796798349526747214 and https://pixelfed.social/p/Splines/796786779066451143 for detail.
Just like #ArcZero in the #spiral for the #IonicVolute, the plan for #EggsAndDarts starts out larger than what is eventually used.
The outermost frame is 7.5 parts or 60 units tall (from A to D), and 5 parts or 40 units wide when µ = 144. The innermost frame is 6 parts or 48 units tall (from B to C), and 4 parts or 32 units wide.
The height and width for both inner and outer are in 3:2 ratio. The difference in height is also split in the ratio 3:2. So, the gap between A and B as 12*2/5 = 4.8, and the gap between C and D as 12*3/5 = 7.2. We then divide both of these gaps in 5 equal segments shown by the dots between them.
Create an ellipse to fill the outer frame, and another to fill in the inner frame. Then interpolate them to create 4 more through the dots, only to delete the 3rd ellipse. This gives us the 5 #rails for sweeping the rim of the egg.
Create circles perpendicular to and touching adjacent pairs of rails, and then #sweepTwoRails using the circles to get the rim shown in the top-right. The red cutting plane marks tentative slicing for eggs.
The bottom left image shows a convex egg created with an #ellipsoid that is 48 units tall, 32 units wide, and 32 units deep. This is equivalent to #revolving the innermost ellipse around its major axis. Only half of this egg is above the oval slab.
The bottom right image shows the concave variant which is created by performing a #booleanDifference between the oval slab and the round egg created above. The top portion of the egg is removed in the concave variant, but the convex variant must still account for the bulge of a fully round egg. As such, the slab heights of the convex and concave variant are different. I will show the measurements later.
To create the slabs for the convex and concave variants, #extrude the outermost ellipse according to their measurements and #cap #planarHoles.
Just like #ArcZero in the #spiral for the #IonicVolute, the plan for #EggsAndDarts starts out larger than what is eventually used.
The outermost frame is 7.5 parts or 60 units tall (from A to D), and 5 parts or 40 units wide when µ = 144. The innermost frame is 6 parts or 48 units tall (from B to C), and 4 parts or 32 units wide.
The height and width for both inner and outer are in 3:2 ratio. The difference in height is also split in the ratio 3:2. So, the gap between A and B as 12*2/5 = 4.8, and the gap between C and D as 12*3/5 = 7.2. We then divide both of these gaps in 5 equal segments shown by the dots between them.
Create an ellipse to fill the outer frame, and another to fill in the inner frame. Then interpolate them to create 4 more through the dots, only to delete the 3rd ellipse. This gives us the 5 #rails for sweeping the rim of the egg.
Create circles perpendicular to and touching adjacent pairs of rails, and then #sweepTwoRails using the circles to get the rim shown in the top-right. The red cutting plane marks tentative slicing for eggs.
The bottom left image shows a convex egg created with an #ellipsoid that is 48 units tall, 32 units wide, and 32 units deep. This is equivalent to #revolving the innermost ellipse around its major axis. Only half of this egg is above the oval slab.
The bottom right image shows the concave variant which is created by performing a #booleanDifference between the oval slab and the round egg created above. The top portion of the egg is removed in the concave variant, but the convex variant must still account for the bulge of a fully round egg. As such, the slab heights of the convex and concave variant are different. I will show the measurements later.
To create the slabs for the convex and concave variants, #extrude the outermost ellipse according to their measurements and #cap #planarHoles.
Splines (@[email protected])
#Ovolo with a composite of both concave and convex eggs as seen from the bottom. For a perspective view, see https://pixelfed.social/p/Splines/796790115584241591. As I will show later, all of this is created using just straight lines and circular or elliptical arcs. Even though I used an oval as the starting point for the eggs, note their striking resemblance with natural eggs — with ends that taper off toward the bottom. This is due to the nature of the Ovolo surface, which is shaped like a bowl where the bottom radius is less than the top radius. So, when the egg is laid on this surface, it "flows" with the contours of that surface, and its bottom end is thereby tapered. Also note that in this view, the top of the eggs appear round, but they are in fact sliced, just like the rippled rim and the surrounding darts.
eicker.news ᳇ tech news»#OpenAI gets $4 billion #revolving #creditline on top of latest funding.« https://www.cnbc.com/2024/10/03/openai-gets-4-billion-revolving-credit-line-on-top-of-latest-funding.html?eicker.news #tech #media
Tarjetas Revolving cómo reclamar.
https://alvarezabogadostenerife.com/?p=50782
#alvarezabogados #abogados #revolving #tarjetarevolving #usura #consumo #derechos #legal #Tenerife #TenerifeSur
50aineOrdinaireMa mère « Alors elle s’est rendu compte que sa fille faisait plein de crédits ´révolvers’ »
Moi dans ma tête « C’est vrai que cela finit en suicide derrière »
INPCNOT ALL WASHING MACHINES ARE CREATED EQUAL!
dicewarebot⚅ ⚃ ⚃ ⚁ ⚀→#unreached
⚀ ⚅ ⚁ ⚄ ⚅→#coerce
⚄ ⚁ ⚀ ⚅ ⚁→#revolving
⚂ ⚅ ⚅ ⚅ ⚃→#massager
⚁ ⚅ ⚀ ⚁ ⚄→#excavate
⚂ ⚀ ⚅ ⚁ ⚃→#galleria
unreached-coerce-revolving-massager-excavate-galleria
Roll your own @ https://www.eff.org/deeplinks/2016/07/new-wordlists-random-passphrases
⚂ ⚁ ⚃ ⚂ ⚀→#golf
⚀ ⚁ ⚁ ⚁ ⚁→#appeasing
⚄ ⚃ ⚃ ⚄ ⚄→#sizing
⚄ ⚁ ⚀ ⚅ ⚁→#revolving
⚁ ⚂ ⚅ ⚀ ⚄→#document
⚀ ⚅ ⚂ ⚄ ⚄→#coming
golf-appeasing-sizing-revolving-document-coming
Roll your own @ https://www.eff.org/deeplinks/2016/07/new-wordlists-random-passphrases