Một sinh viên Tây Ban Nha đã tạo script Bash tự động hóa cài đặt và cấu hình Pi-hole v6 trên Ubuntu. Script này còn tích hợp cài đặt Unbound, PADD và tự động thêm blocklist. Tác giả muốn chia sẻ dự án để nhận phản hồi từ cộng đồng.
#Pihole #Ubuntu #BashScript #Automation #SelfHosted #Project #PiholeV6 #ScriptBash #TựĐộngHóa #DựÁn #UbuntuServer
https://www.reddit.com/r/selfhosted/comments/1q45acf/i_wrote_a_bash_script_to_automate_pihole_v6_on/
I shouldn't rush that much to upgrade my Pi-Hole 🥧🕳️ to the never v6 version after 1-2 day after it released in February 18th, just to end up brooking my existing setup. I had to start over since I was dumb enough to not make a backup of my existing working setup, I don't know what I expected. While the update was nearly fished the gravity updated failed and I had to stop the it with CTRL-C after waiting for hours to complete, it was stuck for some reason. After rebooting my pi the pihole service still started up but slowed down my pi and got completely unresponsive. I had run Bullseye on my Pi Zero W v1.1 board and either way I still wanted to upgrade to Bookworm. I had an older backup of my pi's sdcard with Bullseye and pihole v5 on it that I could flash back to use while I finish setting up the new image with Bookworm and pihole v6. I know I could avoid complicating things if I had another sdcard that I could use for the new image, not having to copy back and fourth different images while making lots of backups frequently of the new image after working on it for a couple of hours.
The only thing that made less painful doing it this was using pishrink that spared me hours whenever I needed to copy back the new image making it way faster then copying back 32 GB that takes a long time. I'm can't be happier that I found this nice tool that speed up significantly copying the images and swapping between the old perfectly working one and the new one until the new one was set up fully. ☺️
It took me days regardless to finish the new image because of lack of time to sit down and work on it until it's done, only doing small steps at a time. Now everything is working fine, I'm running the latest pihole version on bookworm for just about two weeks. 😃
But probably I had to start from an fresh new install, because I tried upgrading from bullseye to bookworm and it wasn't end up well, probably there was lots changes between the two.
@c0mpl3x Also of note - it appears that today's update from 6.0.3 to 6.0.4 nukes this setting (as well as disabling the newly installed TLS server with the selfsigned cert ) so something else to keep an eye out for.
Adding the "no-0x20-encode" back in fixes the issue
And then there was the inexplicably odd and seemingly random failures to resolve legitimately good addresses.
Turns out this was a known issue - although a bit of digging was needed. I was using clouflared as a custom DNS provider (since AT&T seemed to be intercepting DNS queries even after opting out of their stupid "service") and apparently cloudflared does not react well to their new nixed case queries.
Adding "no-0x20-encode" to misc.dnsmasq_lines does seem to resolve that issue as well/
Seems to be functioning as expected at the moment, but will keep an eye out for other smallish issues as they will undoubtedly crop up.
https://discourse.pi-hole.net/t/v6-post-release-fixes-and-findings/76480
Originally published at: V6 – Post release fixes and findings – Pi-hole Well, what a busy couple of days! We have finally released v6 – and we believe by-and-large that it has been a success! Of course, there will be a few bugs and issues that weren’t caught during testing, even with the extended beta release we were probably never going to catch everything – so we’re always keen to fix new issues as soon as they come up after a release. We’ve already released a couple of hotfixes, details...
@c0mpl3x First item is that I was using the integrated piHole DHCP server - and on upgrade that was disabled and DHCP reservations gone.
Not too big of a deal I could spin enable a DHCP server elsewhere and start to see what else needed attention while I re-entered the reservations,
Unfortunately - V6 has a bit of a . . . challenging interface in comparison to the previous version, so will likely be leaving the DHCP server external from the pihole for the time being.
This is an issue that the devs are aware of - perhaps painfully so - althoug I don't expect that it's going to be a priority since I expect that not a lot of folks actually use that functionality
https://discourse.pi-hole.net/t/v6-post-release-fixes-and-findings/76480
Originally published at: V6 – Post release fixes and findings – Pi-hole Well, what a busy couple of days! We have finally released v6 – and we believe by-and-large that it has been a success! Of course, there will be a few bugs and issues that weren’t caught during testing, even with the extended beta release we were probably never going to catch everything – so we’re always keen to fix new issues as soon as they come up after a release. We’ve already released a couple of hotfixes, details...
Reddit Tech VN Bot
Rainer "friendica" Sokoll
Light🐧⁂
Tim Hergert
Buwiwaldi
RTN