The @processing Foundation Newsletter introduced me to the wonderful generaticve artist Licia He (https://www.eyesofpanda.com) and what can I say… I need to do a lot of reading and exploring now 🀩

For example her DearPlotter Font Generator (https://www.eyesofpanda.com/project/dearplotter_font/) or her Plotting Course (https://www.eyesofpanda.com/project/painting_with_plotters/).

Very excited to dive into all her work!

#CreativeCoding #GenerativeArt #PenPlotting #PenPlotter

Licia's Web Playground

I guess I have a pen plotter now! It passed its endurance test with flying colours.

Now to buy some A2 paper :-)

#penplotting #projects #hobby #maker
My laser cutter pen plotter attachment is nearly finished, only issue now is that LaserGRBL assumes that a laser will turn off immediately and starts moving before the pen retracts πŸ€”β€‹

At least the problem is now software

#projects #penplotting #lasercutter #hobby #tech #maker
Well the threaded rods don't work, scrap dowel and electrical tape will have to do until I can get to Bunnings to look for something better. Time for a test run!

#projects #3dprinting #penplotting #hobby #tech
I'm working on making a swappable pen-plotter head for my laser cutter. For the past few hours I've been working on the electronics and I've got something that should work but currently doesn't.

I'm too sleepy and sore to get the o-scope back on the floor to diagnose the problem, but I suspect it's either the diode or the resistor I used. Will have a look tomorrow.

#hobby #electronics #projects #tech #penplotting #maker

I've had some challenges this month, so I haven't posted my genuary as much.

here is day 22,24, and 26 together:

https://codepen.io/fractalkitty/pen/zxBPwxw/34bfe6b6857d81b9854184301a724136

press s to save off and pen-plot

press space to change

#genuary26 #penplotting #p5js

genuary day 22 + day 24 + day26

...

This came out good. Took forever at 1cm/sec and drained four pens, but I'd do it again. Bonus, its a sticker. #penplotting
Still dealing with some slippage on the left idler, but it’s getting there. This is just the built in test, I’ll try to feed it some HPGL over the weekend.
#penPlotting
#penplotting on a peel and stick vinyl sheet, gradually adjusting the mixture of ink in a sharpie marker.