Custom mixer for Stereo Signals (Input + AUX), equipped with Headphones out.
#dpfx #dpFXpedals #stereodevices #stereomixer #pedalmixer #stereopedals #boutiquepedals #handpaintedpedals #handmadepedals #heisenberg #breakingbad #custompedals #headphonepreamp #headphonesout #dpeffects #headphonespreamp #greekpedals #エフェクター

Custom 2 input Mixer with Output selection and isolation. It is equipped with two independent outputs (A,B). Additionally, the B-Output is isolated through an audio transformer in order to avoid any ground loop noise when connecting the outputs into different amps or other devices.

A rotary switch allows you to select which output is active each time and also offers a “mute” position where both outputs are silenced.

The mixer can handle instrument level signals as well as line level signals (unbalanced). If you ever need more headroom you can increase the power supply voltage up to 24V.

*** Specifications:
- Input Impedance: 10MΩ
- Output Impedance: 100Ω
- Inputs 1-2 and output-A have common ground
- B-output is isolated through an audio transformer.
- 4 position Rotary switch: (Mute), (A), (B), (A & B)
- Voltage Required: DC 9-24V
- Polarity: center negative
- Max Current draw: 14mA (@ 9V)
- Headroom vs power supply: ~7Vpp@9V | ~10Vpp@12V | ~22Vpp@24V

#dpFX #dpFXpedals #mixerpedal #isolatedsplitter #outputselector #mixersplitter #isolatedoutput #boutiquepedals #pedalmixer #mixerpedal #handmadeeffects #handmadepedals #handpaintedpedals #2inputmixer #instrumentmixer #pedalseffects #effectspedals #pedalsandeffects #pedalbuilder

KRAMA-3+. Blender with loop control (parallel/series) & stacking order control.
(specs in comment)

#dpFX #dpFXpedals #blenderpedal #parallelblender #seriesparallel #loopswitcher #boutiquepedals #triparallelmixer #handmadeeffects #handmadepedals #handpaintedpedals #parallel2series #parallelloops #blenderswitcher #pedalmixer #pedalblender #effectspedals #guitarpedals #basspedals #pedalsandeffects #エフェクター

This is the "Stereo Splitter (THRU) & Mono Mixer with Pan Control"

With this device you can mix two signals into a single output and still be able to use the original signals since they pass through the splitter unchanged to the respective outputs.

e.g.: You can mix the L & R channels of a stereo signal down to mono and still be able to use the original stereo signal.

A Pan knob has been added to the mixer in order to help you set the desired mix level of the two signals.

- Voltage Required: DC 9-24 Volt
- Polarity: Negative tip
- Max Current draw: 10mA (@ 9V)
- Input Impedance: 1MΩ
- Output Impedance: 100Ω
- All jacks are TS

#dpFX #dpFXpedals #boutiquepedals #handmadepedals #handpaintedpedals #splitter #mixer #stereosplitter #stereomixer #stereotomono #pedalsandeffects #guitarpedals #basspedals #pedaleffects #pedaleffects #pedalmixer #pedalsplitter