Mastodawn

I've been so busy lately but I'm letting writing be an escape from the mundane. So read about what I've done with my used Instax film cartridges and if you've reused them too, let me know! Always on the lookout for ideas!

https://tinyurl.com/ycy6bc5j

#instax

Reusing Instax Cartridges

A sort of DIY thing for those who have time

Jules 23h ago

Bronica ETR-Si Camera
Bronica 100mm f4 Macro Lens
Fuji Instax Mini Back

The size of a Fuji Instax Mini print is almost the same as a 6x4.5cm negative. There's a little black bar down the side of the print as 6x4.5 is slightly smaller. I believe it's possible to remove the film mask from the camera body and this will remove the black bars, but I haven't tried it yet.

The image quality is excellent. The highest I've seen so far on Instax Mini. I have full manual control over the camera too. This is possibly the best quality and most control options for an Instax Mini print.

The film back is SLS 3D printed, and I bought it from a seller on eBay. It works well, but I need to use it more to get over my fear of breaking the mounting points.

#zenzabronicaetrsi #bronicaetrsi #zenzabronica #instax #fujiinstax #instantphotography #instaxphotography #photography #macro #zezanon100mmmacro #zezanonmacro100mm #mediumformat #6x4.5

AnnaWind 1d ago

For #52Frames week 15: Details, a double exposure of the maple tree in my backyard. Bark detail, plus glorious blossoming crown.

#52Frames_Details #lomography #DianaInstantSquare #Instax #InstaxSquare

Jules 1d ago

Bronica ETR-Si Camera
Bronica 100mm f4 Macro Lens
Fuji Instax Mini Back

The size of a Fuji Instax Mini print is almost the same as a 6x4.5cm negative. There's a little black bar down the side of the print as 6x4.5 is slightly smaller. I believe it's possible to remove the film mask from the camera body and this will remove the black bars, but I haven't tried it yet.

The image quality is excellent. The highest I've seen so far on Instax Mini. I have full manual control over the camera too. This is possibly the best quality and most control options for an Instax Mini print.

The film back is SLS 3D printed, and I bought it from a seller on eBay. It works well, but I need to use it more to get over my fear of breaking the mounting points. On Bronica film backs, these points are metal, but on the Instax back they are plastic. My fears could be unfounded, but I am worried they are going to break.

#zenzabronicaetrsi #bronicaetrsi #zenzabronica #instax #fujiinstax #instantphotography #instaxphotography #photography #macro #zezanon100mmmacro #zezanonmacro100mm #mediumformat #645