Heri_3d4d ago

✈️ E190-E2 1:400 - SLA 1 • STL files
➡️ Download 3D print model: https://cults3d.com/:1098910
💡 Designed by @Herisuprapto

@cults3d #diecastlovers #resinprinter #gse #smallbusiness

E190-E2 1:400 - SLA 1

The E190-E2's wing design incorporates a high aspect ratio and advanced aerodynamics, significantly contributing to its exceptional fuel efficiency and performance. Its integrated engine and airframe configuration, including the highly efficient Pratt & Whitney PurePower Geared Turbofan engines, provides a noticeable reduction in noise footprint and operational costs. This model was printed by someone before because at that time I didn't have an SLA printer, the two printout pictures above are from him. This version has less detail (no wing and tail outlines, etc.) than this one, https://cults3d.com/en/3d-model/architecture/e190-1-400-resin-printer. Hope you guys like it, thanks for stopping by. Here’s what each label means: - FDM: Printed on an FDM machine. These versions have lower detail, no panel lines, no engine blades, and use thicker walls. - SLA 1: Printed on an SLA machine. These include antennas, include engine blades, have thinner walls, but still do not have panel lines. - SLA 2: Same as SLA 1, but with added panel lines for higher surface detail.

Cults 3D
LaRampa.it6d ago

#ComunitàEnergetiche, #diGrazia (#Consumerismo): "#trasparenza al #GSE e tutela per #cittadini, #imprese ed #entilocali"

https://www.larampa.news/2026/05/comunita-energetiche-di-grazia-trasparenza-gse-tutela-cittadini-imprese-enti-locali/

Comunità Energetiche, di Grazia: "trasparenza al GSE e tutela per cittadini, imprese ed enti locali"

“Esprimo pieno sostegno alla diffida formale inviata dall’associazione nazionale al Gestore dei Servizi Energetici (GSE) e al Ministero dell’Ambiente e

larampa
Heri_3dMay 7

✈️ Gulfstream G550 1:400 - SLA 1 • STL files
➡️ Download 3D print model: https://cults3d.com/:3594595
💡 Designed by @Herisuprapto

@cults3d #diecastlovers #resinprinter #gse #smallbusiness

Gulfstream G550 1:400 - SLA 1

The Gulfstream G550 is a luxurious long-range business jet, known for its elegant design and cutting-edge technology. With a sleek, streamlined body and spacious interior, it combines comfort and performance for both private and corporate travel. Equipped with advanced avionics and a powerful engine, the G550 can cover vast distances, ensuring efficiency and reliability at high altitudes. Here’s what each label means: - FDM: Printed on an FDM machine. These versions have lower detail, no panel lines, no engine blades, and use thicker walls. - SLA 1: Printed on an SLA machine. These include antennas, include engine blades, have thinner walls, but still do not have panel lines. - SLA 2: Same as SLA 1, but with added panel lines for higher surface detail.

Cults 3D
 トラベル WatchApr 27

飛行機への荷物の積み込みを人型ロボットが担う？　JALとGMO AIRがヒューマノイドによるグランドハンドリング業務の実証実験
https://travel.watch.impress.co.jp/docs/news/2104894.html

#travel_watch_impress #GMO #JAL #GSE #グランドハンドリング #ヒューマノイド #企業_政府_官庁 #国内エアライン #旅の方法 #空旅 #飛行機 #空港 #旅行 #観光

飛行機への荷物の積み込みを人型ロボットが担う？　JALとGMO AIRがヒューマノイドによるグランドハンドリング業務の実証実験

　JALとGMO AI＆ロボティクス商事（GMO AIR）は4月27日、空港のグランドハンドリング業務における人型ロボットの活用に向けて実証実験を開始した。

トラベル Watch
Heri_3dApr 25

✈️ Cessna 172 Skyhawk 1:72 - FDM • 3D files
➡️ Download 3D print model: https://cults3d.com/:78377
💡 Designed by @Herisuprapto

@cults3d #diecastlovers #resinprinter #gse #smallbusiness

Cessna 172 Skyhawk 1:72 - FDM

The Cessna 172 Skyhawk is an iconic, high-wing, four-seat aircraft known for its forgiving flight characteristics, making it a staple for primary flight training. Its simple, reliable airframe and tricycle landing gear contribute to its legendary status as one of the most successful general aviation aircraft ever built. The compressed file contains .stl, the printed illustration I made in .pdf format, and a super short video on my Instagram: @ heri_3d, I hope you like it. Here’s what each label means: - FDM: Printed on an FDM machine. These versions have lower detail, no panel lines, no engine blades, and use thicker walls. - SLA 1: Printed on an SLA machine. These include antennas, include engine blades, have thinner walls, but still do not have panel lines. - SLA 2: Same as SLA 1, but with added panel lines for higher surface detail.

Cults 3D
Heri_3dApr 14

✈️ Airbus A350-1000 1:500 - FDM • STL files
➡️ Download 3D print model: https://cults3d.com/:483589
💡 Designed by @Herisuprapto

@cults3d #diecastlovers #resinprinter #gse #smallbusiness

Airbus A350-1000 1:500 - FDM

The Airbus A350-1000 is the longest fuselage variant of the A350 wide-body airliner family, boasting a typical three-class seating capacity of 350-410 passengers and leveraging advanced carbon-fiber-reinforced polymer construction to achieve significant reductions in fuel burn and operating costs. Its power comes from the highly efficient Rolls-Royce Trent XWB-97 turbofan engines, providing the necessary thrust for its impressive range and high-density route capability. This model is printed using an FDM printer, I hope you like it, thank you. Here’s what each label means: - FDM: Printed on an FDM machine. These versions have lower detail, no panel lines, no engine blades, and use thicker walls. - SLA 1: Printed on an SLA machine. These include antennas, include engine blades, have thinner walls, but still do not have panel lines. - SLA 2: Same as SLA 1, but with added panel lines for higher surface detail.

Cults 3D
MarketForces AfricaApr 8

The Ghana Stock Exchange (GSE) rebounded in Tuesday’s session, with both benchmark indices closing higher on the back of renewed buying interest, according to SIC Brokers Limited

https://dmarketforces.com/ghana-stock-exchange-rebounds-total-gcb-lead-gains/

#GSE #GhanaStockExchange

Ghana Stock Exchange Rebounds, Total, GCB Lead Gains

The Ghana Stock Exchange (GSE) rebounded in Tuesday’s session, with both benchmark indices closing higher on the back of renewed buying interest, according to

MarketForces Africa
Heri_3dApr 2

✈️ E190-E2 1:400 - SLA 1 • STL files
➡️ Download 3D print model: https://cults3d.com/:1098910
💡 Designed by @Herisuprapto

@cults3d #diecastlovers #resinprinter #gse #smallbusiness

E190-E2 1:400 - SLA 1

The E190-E2's wing design incorporates a high aspect ratio and advanced aerodynamics, significantly contributing to its exceptional fuel efficiency and performance. Its integrated engine and airframe configuration, including the highly efficient Pratt & Whitney PurePower Geared Turbofan engines, provides a noticeable reduction in noise footprint and operational costs. This model was printed by someone before because at that time I didn't have an SLA printer, the two printout pictures above are from him. This version has less detail (no wing and tail outlines, etc.) than this one, https://cults3d.com/en/3d-model/architecture/e190-1-400-resin-printer. Hope you guys like it, thanks for stopping by. Here’s what each label means: - FDM: Printed on an FDM machine. These versions have lower detail, no panel lines, no engine blades, and use thicker walls. - SLA 1: Printed on an SLA machine. These include antennas, include engine blades, have thinner walls, but still do not have panel lines. - SLA 2: Same as SLA 1, but with added panel lines for higher surface detail.

Cults 3D
Alessandro ScapuzziMar 31

Complimentoni al #GSE che per la compilazione delle domande on-line, richiede espressamente #Adobe un software proprietario che gira solo su #windows e #mac_osx

Ma se le domande sono on-line, perchp non fai un form on-line, poi lo scarico in #pdf, lo firmo e lo ricarico anzichè il contrario.

che palle, oh
#linux #opensource

Heri_3dMar 22

✈️ Gulfstream G550 1:400 - SLA 1 • STL files
➡️ Download 3D print model: https://cults3d.com/:3594595
💡 Designed by @Herisuprapto

@cults3d #diecastlovers #resinprinter #gse #smallbusiness

Gulfstream G550 1:400 - SLA 1

The Gulfstream G550 is a luxurious long-range business jet, known for its elegant design and cutting-edge technology. With a sleek, streamlined body and spacious interior, it combines comfort and performance for both private and corporate travel. Equipped with advanced avionics and a powerful engine, the G550 can cover vast distances, ensuring efficiency and reliability at high altitudes. Here’s what each label means: - FDM: Printed on an FDM machine. These versions have lower detail, no panel lines, no engine blades, and use thicker walls. - SLA 1: Printed on an SLA machine. These include antennas, include engine blades, have thinner walls, but still do not have panel lines. - SLA 2: Same as SLA 1, but with added panel lines for higher surface detail.

Cults 3D