Analog Burn

Go to Analog Burn.

It is curving out so well. It makes VERY good marks on galvenized metals.
#metal #fabricating #MakeYourOwnTools
Man charged with murder after 14-year-old trans girl’s dismembered body found near lake

A man has been arrested after the dismembered body of 14-year-old trans girl Pauly Likens was found near a lake in Pennsylvania.

PinkNews | Latest lesbian, gay, bi and trans news | LGBTQ+ news
Wow, what a mountain we had to climb to get this far. We are finally ready for the test ride tomorrow! We had to adjust the brackets that the shocks mount to, replace the LCD readout which our client screwed up to add to our workload, and hard weld the frame to the bike. Then we hooked up the batteries and controllers to test the whole thing and make sure everything worked.
#fabrication #fabricator #fabricating #welding #beetlebike

Got the battery box problem sorted out, tacked it to the frame then removed the wheels and hard welded the battery box frame and other elements that I had tack welded previously. After that I cleaned up the welds and I then made a grain-free but gluten-full pizza for the crew's lunch.

A great day of fabrication and welding!
#fabricator #fabrication #fabricating #welder #WELDING

We started mocking up the beetle. I dyed and finished the stage.

#fabrication #fabricator #fabricating #anticinadrain

Took it for a test trot. It was awkward moving while having to hold it stooped over. Would have been better to harness up Mateo and have him pull it.

Next we need to hard weld the mounts, drill the holes for the right side shock, and fix a wiring issue that affects the throttle function. It was working fine until it wasn't.
#fabrication #fabricating #fabricator

We made the mounts for the wheels and got the componets tack welded to the frame and itself. We also made the mounting points for the shocks from angle iron. #fabrication #fabricating #fabricator #welding #welder

After hours of filing, the inner tube was still binding. When I took a gander down the inside of the outer tube to see what was happening, something didn't look right.

Yeah. The outer tube is about 1/32" (or more) out of straight. The same tube looks bent compared to multiple other known-straight tubes. This explains a lot.

#welding #fabrication #fabricating