O Galdo⚡ OpenPLC V4 cap_03 Manejo de Pantalla LCD I2C como HMI en #OpenPLC y un #DHT11 con #esp32 devkit v1
https://youtu.be/p4ftmTqgUpw
YouTube
Doc CoolInstallation des 8-Channel-LoRaWAN-Gateway M2 Starter Kit von Seeed Studio
--> https://cool-web.de/lora/seeed-sensecap-m2-multi-channel-lorawan-indoor-gateway-installation.htm
#LoRa #LoRaWAN #Seeed #SenseCAP #M2 #Gateway #Sensoren #XIAO #ESP32S3 #DHT11 #Grove #Base #Shield #Wio #E5 #STM32 #EU868 #Funk #DIY #Elektronik #Maker #Mikrocontroller
13Chamber Master: Control Your 3D Printer Enclosure Like a Pro https://hackaday.com/2025/12/31/chamber-master-control-your-3d-printer-enclosure-like-a-pro/
#3dPrinterhacks #3dprinterenclosure #Dht11 #DS18B20 #ESP32
#3dPrinterhacks #3dprinterenclosure #Dht11 #DS18B20 #ESP32
FacelesstechOMG I feel like a fool, so I've been working on a nice small temperature sensor you could wear build around the M5stick. I picked the DHT11 because it's super cheap and easy to work with. Well I found out it doesn't sense temperature below zero degrees.... Back to the drawing board #m5stack #dht11 #arduino
HabrРулим светодиодом по UDP и ESP8266
Привет, Хабр! Сегодня я поделюсь опытом работы с протоколом UDP вместе с микроконтроллером ESP8266 , где я управлял светодиодом, а также получал температуру с датчика DHT11 . Всё управление будет происходить из Android-приложения, написание логики которого также будет рассмотрено.
Solve Computer ScienceESP8266 flammable gas alarm - part 5
ESP8266 flammable gas alarm - part 5
ESP8266 flammable gas alarm - part 4
ESP8266 flammable gas alarm - part 4
OlimexInterfacing different sensors DHT11, DHT22, SHTC3, DS18B20 for temperature and humidity measurements with MicroPython and ESP32-EVB https://olimex.wordpress.com/2025/05/07/interfacing-different-sensors-with-esp32-evb-and-micropython-dht11-dht22-shtc3-and-ds18b20/ #dht11 #dht22 #shtc3 #ds18b20 #esp32 #micropython
peppe8oUpdated tutorial to use #RaspberryPI with #DHT11 #temperature and #humidity sensor by using the built-in modules and get data in your #python program #microelectronics #diy https://peppe8o.com/raspberry-pi-dht11-sensor/
Sebastian 
In the spirit of doing something new every day, I’ve dug out old #NodeMCU #ESP8266 and started playing with #ESPHome. Despite initial difficulties with connecting it to a hidden WiFi (it’s not that obvious!🤡), it actually worked and I can’t believe how easy it was to connect it and report temperature and humidity from #DHT11 sensor to #HomeAssistant.
I guess the real party trick is to build it to be in a usable form, with a thought out layout and in a case…
I guess I need a 3D printer now…😂